
Plumber pricing in Edmonton
What plumbers charge in Edmonton (typically C$80-C$180/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Edmonton plumber pricing
What plumbers should charge in Edmonton
Edmonton plumbers work under the Alberta apprenticeship system (AIT Red Seal 3303 Plumber) and the Alberta Plumbing Code. EPCOR is Edmonton's municipal utility (water, drainage, and sewer in one place, rare for Canadian cities), so connection coordination differs from Calgary's ENMAX/EPCOR split. Brutal sustained cold (December-March, -15°C to -30°C without Chinook recovery) drives a longer frozen-pipe season than Calgary. Pre-1940 housing in Old Strathcona, Highlands, and Glenora has galvanized supply lines and clay drain lines at end-of-life. Alberta One-Call required before any dig.
Hourly rate
C$80-C$180
per hour, weekday daytime
Call-out fee
C$56-C$120
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common plumber jobs in Edmonton
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in CAD.
Standard call-out (within radius)
What's included
Includes first 30 min diagnostic. Credited against repair on most jobs.
Tap or mixer replacement
What's included
Includes 30-45 min labour + tap supply. Premium mixers add $80 to $200.
Burst pipe repair (accessible)
What's included
Hourly labour + fittings. Wall-cavity repairs cost more.
Toilet replacement (like-for-like)
What's included
Includes pan, cistern, seat, and 60-90 min labour. Premium suites add cost.
Geyser / hot water cylinder replacement
What's included
Includes geyser, drip tray, vacuum breakers, isolation valves, labour, and disposal of old unit.
Drain clearing (jet or rod)
What's included
Hourly + equipment. CCTV survey add $180 to $400 if needed.
Bathroom re-plumb
What's included
Depends on hot/cold runs, fixture count, and access. Excludes tiling and walls.
Kitchen sink + dishwasher install
What's included
Includes connection, isolation valves, waste line. Sink supply not included.
Emergency call-out (after hours)
What's included
Typical 6pm-7am, weekends, and public holidays. State the multiplier on the quote.
Edmonton quote factors
What to factor into your Edmonton plumber quote
Local context that should shape what you quote as a plumber in Edmonton. Continental subarctic-influenced. Brutal cold winters (December-March, sustained -15°C to -30°C, occasional extreme -40°C with windchill, Edmonton averages colder than Calgary because no Chinook), short hot summers (July-August, 22-28°C, occasional 30°C+), low precipitation (~480mm/year), severe summer thunderstorms (1987 Edmonton Tornado F4 was Canada's second-deadliest). Freeze-thaw cycles 60-80/year (less than Calgary due to less Chinook swing).
AIT Red Seal 3303 Plumber + Master Plumber
Alberta Apprenticeship and Industry Training (AIT) Red Seal 3303 Plumber is the journeyperson trade certification. Master Plumber is issued via Alberta Municipal Affairs and is required to pull permits as a contractor. Print Red Seal cert number and Master Plumber number on every quote and invoice. City of Edmonton Development Services won't issue permits to unlicensed contractors. Annual business licence with City of Edmonton also required.
EPCOR water + drainage coordination
EPCOR is Edmonton's municipal utility for water, drainage, and sewer (also electricity). One utility for water-in and sewer-out simplifies scheduling versus split-utility cities, but EPCOR Drainage Services controls all sewer-line connection work. Quote EPCOR coordination ($800-$4,500 per service-line job) including permits, inspection, restoration. Lead times 3-8 weeks for service-line work. State this on the contract so clients don't blame the plumber for utility delays.
Brutal sustained cold drives frozen-pipe season
Edmonton averages colder than Calgary because there's no Chinook to moderate the cold. December-March can sit at -20°C to -30°C for weeks with no recovery. Quote emergency frozen-pipe callout ($260-$480 first hour, 2x-2.5x weekday/weekend after-hours rates) Jan-Feb. State 'no exterior or attic work below -15°C' on contracts where applicable. Heat-tape install and pipe-insulation upgrade ($450-$2,400 per home) is a worthwhile pre-winter upsell.
Premium tier: Glenora, Crestwood, Riverbend, Westmount
Glenora (T5N), Crestwood (T5R), Westmount (T5M), Windsor Park (T6G), and Riverbend (T6R) command CAD $140-$230/hour, 30-45% above standard Edmonton. Master Plumbers $180-$330. Heritage Glenora and Highlands mansions often need full re-plumb at $25,000-$95,000 per home. Print Red Seal and Master Plumber credentials prominently.
Pre-1940 galvanized + clay drain replacement
Old Strathcona (T6E), Garneau (T6E), Highlands (T5W), and parts of Glenora have galvanized supply pipe and clay drain lines from 1900-1930. Quote whole-home re-plumb ($18,000-$55,000 with PEX or copper supply, ABS or cast-iron-no-hub drains) and clay-to-PVC sewer replacement ($8,500-$28,000) as separate scopes. Pre-quote on every pre-1940 callout; insurance is increasingly refusing claims on aged galvanized.
Alberta One-Call + GST 5% only
Alberta One-Call (Click Before You Dig) required before any underground work; non-compliance carries OHS Alberta and WCB Alberta liability. Quote One-Call lead time (2-5 business days) on every dig contract. Alberta has no PST and no HST, so invoices show a single GST 5% line on the subtotal. State 'GST 5% included' or 'plus GST 5%' clearly so out-of-province clients understand.
Sample quote
A real Edmonton plumber quote you can copy
Standard burst geyser replacement, 150L electric, residential. Replace the line items and rates with your own; the structure stays.
Call-out fee (within 15km radius)
150L Heat Tech vertical electric geyser (5-year warranty)
Drip tray, vacuum breakers, isolation valves, safety valve
Plumbing labour (3 hours installed, drain old unit, test new)
Disposal of old geyser
Certificate of Compliance (electrical)
FAQ
Edmonton plumber pricing questions, answered
Common questions about plumber pricing in Edmonton, with answers framed for tradies pricing their own work.
CAD $95-$160/hour for journeyperson Red Seal plumbers in standard Edmonton (Mill Woods, Bonnie Doon, Forest Heights, Castle Downs). CAD $140-$230/hour for premium areas (Glenora T5N, Crestwood T5R, Westmount T5M, Riverbend T6R, Windsor Park T6G). Master Plumbers $180-$330/hour. Emergency callout $260-$480 first hour. State AIT Red Seal 3303 and Master Plumber numbers on every quote. Single GST 5% line on the invoice (Alberta has no PST).
Yes. AIT Red Seal 3303 Plumber is the journeyperson trade certification; Master Plumber is issued via Alberta Municipal Affairs and is required to pull permits as a contractor. Print both numbers on every quote and invoice. City of Edmonton Development Services won't issue permits to unlicensed contractors. Annual City of Edmonton business licence also required.
EPCOR is Edmonton's municipal utility for water, drainage, and sewer (rare in Canada to have one provider for both). EPCOR Drainage Services controls all sewer-line connections. Quote EPCOR coordination ($800-$4,500 per service-line job) including permits, inspection, restoration. Lead times 3-8 weeks. State this on the contract so clients don't blame the plumber for utility delays.
Edmonton averages colder than Calgary because there's no Chinook to break the cold. December-March can sit at -20°C to -30°C for weeks. Quote emergency frozen-pipe callout ($260-$480 first hour, 2x-2.5x weekday/weekend after-hours rates) Jan-Feb. State 'no exterior or attic work below -15°C' on contracts where applicable. Heat-tape and pipe-insulation upgrade ($450-$2,400 per home) is a worthwhile pre-winter upsell.
Yes. Old Strathcona, Garneau, Highlands, and parts of Glenora have galvanized supply pipe and clay drain lines from 1900-1930. Quote whole-home re-plumb ($18,000-$55,000 with PEX or copper supply, ABS or cast-iron-no-hub drains) and clay-to-PVC sewer replacement ($8,500-$28,000) as separate scopes. Insurance is increasingly refusing claims on aged galvanized.
Standard rates are $80 to $150 per hour in the US, £50-130 in the UK, A$100-220 in Australia, R400-1,200 in South Africa, and C$80-180 in Canada. Metro areas typically command a 20-30% premium.
Hourly rates reflect overhead (vehicle, tools, insurance, compliance), region, and seniority. A licensed master plumber with a CoC certification charges more than an apprentice. Always check the licence before booking high-value work.
For anything over $500, get 2-3 quotes. Compare scope, brand specifications, and warranty terms, not just the headline price. The cheapest quote often skips parts or uses budget brands that fail in 18 months.
Typically travel time, fuel, the first 15-30 minutes on site, and basic diagnostic work. Most plumbers credit the call-out against the repair cost if the customer proceeds with the job.
1.5x to 2x is industry standard for after-hours, weekends, and public holidays. The reason: out-of-hours work pulls the plumber away from their family and disrupts their normal schedule.
Keep going
More plumber resources
The full international pricing guide, ready-to-send templates, and the main plumbers page.
Full plumber pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Plumbers
Send branded quotes and invoices from your phone in 2 minutes. Built for plumbers.
Plumbing Quote Template
Itemised plumbing quote with call-out, parts, labour, disposal, and tax.
Testimonials
Trusted by tradespeople in Edmonton
Real plumbers and other tradies in Edmonton use QuoteGenio to quote and invoice from their phone.
“Clients love how professional the quotes look. Feels like I upgraded my whole business overnight. The mobile app is a lifesaver.”
Jessica Martinez
HVAC Contractor · Austin, TX
“Roofs are not cheap. Having itemised quotes with labour and materials split helps clients trust my pricing. My acceptance rate has gone up noticeably.”
Marco Davids
Roofer · Cape Town
“My quotes look a lot more professional now. Clients take them seriously and I spend less time formatting documents.”
Megan Daniels
Interior Designer · Birmingham
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.

Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.
