Plumber pricing in Dublin
What plumbers charge in Dublin (typically €60-€165/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Dublin plumber pricing
What plumbers should charge in Dublin
Dublin plumbers work in Ireland's largest and highest-priced residential market. RGI (Registered Gas Installers Ireland) registration is mandatory for any gas-side work; plumbing-only work is less regulated but Master Plumbers Federation Ireland membership and Construction Industry Federation (CIF) badges are standard premium-tier trust signals. D04 (Ballsbridge, Donnybrook, Sandymount), A94 (Foxrock, Blackrock), and A96 (Dalkey, Killiney) rates run 40-80% above outer Dublin. Georgian terraces (1700s-1820s) in D02 (Merrion Square, Fitzwilliam Square, Mountjoy Square, St Stephen's Green) have lead supply pipes, original cast-iron stacks, and Protected Structure status under Section 57 requiring Local Authority consent for any external alteration.
Hourly rate
€60-€165
per hour, weekday daytime
Call-out fee
€42-€90
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common plumber jobs in Dublin
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in EUR.
Standard call-out (within radius)
What's included
Includes first 30 min diagnostic. Credited against repair on most jobs.
Tap or mixer replacement
What's included
Includes 30-45 min labour + tap supply. Premium mixers add €60 to €150.
Burst pipe repair (accessible)
What's included
Hourly labour + fittings. Wall-cavity repairs cost more.
Toilet replacement (like-for-like)
What's included
Includes pan, cistern, seat, and 60-90 min labour. Premium suites add cost.
Geyser / hot water cylinder replacement
What's included
Includes geyser, drip tray, vacuum breakers, isolation valves, labour, and disposal of old unit.
Drain clearing (jet or rod)
What's included
Hourly + equipment. CCTV survey add €135 to €300 if needed.
Bathroom re-plumb
What's included
Depends on hot/cold runs, fixture count, and access. Excludes tiling and walls.
Kitchen sink + dishwasher install
What's included
Includes connection, isolation valves, waste line. Sink supply not included.
Emergency call-out (after hours)
What's included
Typical 6pm-7am, weekends, and public holidays. State the multiplier on the quote.
Dublin quote factors
What to factor into your Dublin plumber quote
Local context that should shape what you quote as a plumber in Dublin. Mild oceanic Atlantic. Mild winters (Dec-Feb, 3-8°C, occasional frost, rare snow), cool summers (June-Aug, 15-20°C, occasional 25°C+ heatwaves), high rainfall (~750mm/year, frequent rain), persistent strong wind (Atlantic gales). No significant earthquake risk. Atlantic Storm Surge coastal flooding risk.
Premium D04 / A94 / A96 vs outer-Dublin tier
Premium postcodes (D04 Ballsbridge/Donnybrook/Sandymount, A94 Foxrock/Blackrock, A96 Dalkey/Killiney, D06 Ranelagh/Rathmines/Rathgar, D13 Howth) command €95-€175/hour for standard plumbing and €140-€240/hour for Master Plumber Federation work. Mid-tier (D07 Smithfield/Phibsboro, D08 Inchicore, D09 Drumcondra, D14 Dundrum, D02 Docklands) €70-€130/hour. Working postcodes (D11 Finglas/Ballymun, D17 Coolock, D22 Clondalkin, D24 Tallaght) €60-€110/hour. Quote the tier explicitly; D04 clients compare against other D04 trades, not Tallaght.
RGI mandatory for any gas work
RGI (Registered Gas Installers Ireland) registration is mandatory for any gas installation under Gas Safety Regulations 2008. Print RGI number on every quote and on the appliance Completion Certificate. Unregistered gas work is illegal, uninsurable, and voids Gas Networks Ireland (Bord Gáis) connection. Annual landlord Gas Safety Certificate (CP12-equivalent) is recurring revenue from rental portfolios.
Georgian Protected Structure consent
Most central Dublin properties (D01, D02, D04 Merrion Square cluster) are Protected Structures under Section 57 of the Planning and Development Act 2000. Any external alteration (soil stacks, condensate flues, condenser units, external pipework, lead-replacement on visible elevations) needs Local Authority consent from Dublin City Council. Quote consent expediter (€1,200-€4,500) and 8-16 week timeline on every central Georgian plumbing job. Architectural Conservation Area (ACA) designations cover most Georgian Dublin.
Lead supply pipe replacement on pre-1970 stock
Most pre-1970 Dublin homes still have lead supply pipes from main to property. Irish Water (now Uisce Éireann) will replace the public-side section free of charge under their lead replacement programme; private-side replacement (€800-€3,500 per property) is the homeowner's responsibility. Quote lead pipe replacement on every Victorian or Georgian job; BER assessments and mortgage surveys flag lead pipes.
Cast-iron stack replacement on Georgian and Victorian terraces
Georgian (1700s-1820s) and Victorian (1860s-1910) terraces in D02, D06, D07, D09 have original cast-iron soil stacks at end-of-life with cracking, rust, and bad seals. Quote stack replacement (€1,500-€6,000 per stack including scaffold and access permit) on every pre-war bathroom or kitchen refurb. On Protected Structures, replacement must be like-for-like cast-iron, not uPVC; specialist heritage stack at €2,500-€8,500 per stack.
VAT 13.5% reduced rate vs 23% standard
Most residential plumbing repair, renovation, and improvement work qualifies for VAT 13.5% reduced rate under VAT Consolidation Act 2010. New-build housing zero-rated; commercial plumbing standard rate 23%. State VAT treatment clearly on every quote; Revenue Commissioners enquiries are common at premium tier. VAT registration threshold €42,500 services turnover (€85,000 goods).
Sample quote
A real Dublin plumber quote you can copy
Standard burst geyser replacement, 150L electric, residential. Replace the line items and rates with your own; the structure stays.
Call-out fee (within 15km radius)
150L Heat Tech vertical electric geyser (5-year warranty)
Drip tray, vacuum breakers, isolation valves, safety valve
Plumbing labour (3 hours installed, drain old unit, test new)
Disposal of old geyser
Certificate of Compliance (electrical)
FAQ
Dublin plumber pricing questions, answered
Common questions about plumber pricing in Dublin, with answers framed for tradies pricing their own work.
€60-€110/hour for standard plumbing in working Dublin (D11 Finglas, D17 Coolock, D22 Clondalkin, D24 Tallaght). €70-€130/hour for mid-tier (D07 Smithfield, D08 Inchicore, D09 Drumcondra, D14 Dundrum). €95-€175/hour for premium (D04 Ballsbridge, A94 Foxrock, A96 Dalkey, D06 Ranelagh/Rathmines, D13 Howth). Master Plumber Federation and RGI-registered specialists €140-€240/hour. VAT 13.5% on most residential renovation work, shown as a separate line.
Yes, mandatory for any gas work in Ireland under Gas Safety Regulations 2008. Print RGI number on every quote and Completion Certificate. Clients can verify online at rgii.ie. Unregistered gas work is illegal, uninsurable, and voids Gas Networks Ireland connection. Plumbing-only (no gas) work doesn't require RGI but Master Plumbers Federation Ireland membership is the equivalent premium-tier trust signal.
€10,000-€32,000 for a single-bathroom refurb in a Merrion Square or Fitzwilliam Square Georgian terrace depending on Protected Structure scope. Includes strip-out, like-for-like cast-iron stack replacement (€2,500-€8,500), lead-pipe replacement (€800-€3,500), copper supply, fixture install, pressure test. Add Section 57 consent expediter (€1,200-€4,500) and 8-16 week Local Authority consent timeline. VAT 13.5% on top of labour and materials.
Most residential repair, renovation, and improvement plumbing work qualifies for VAT 13.5% reduced rate under VAT Consolidation Act 2010 (the Two Thirds rule applies on labour-plus-materials). Commercial plumbing standard rate 23%. New-build housing zero-rated. State VAT treatment clearly on every quote and Completion Certificate. VAT registration threshold is €42,500 services turnover (€85,000 goods).
Yes, on every pre-1970 property. Lead supply pipes are flagged by BER assessors and mortgage surveys. Irish Water (Uisce Éireann) replaces the public-side section free of charge under their lead replacement programme; private-side replacement (€800-€3,500) is the homeowner's responsibility. Quote WRAS-equivalent MDPE replacement on every Victorian or Georgian property.
Standard rates are €60 to €115 per hour in the US, £50-130 in the UK, A€75-220 in Australia, R400-1,200 in South Africa, and C€60-180 in Canada. Metro areas typically command a 20-30% premium.
Hourly rates reflect overhead (vehicle, tools, insurance, compliance), region, and seniority. A licensed master plumber with a CoC certification charges more than an apprentice. Always check the licence before booking high-value work.
For anything over €375, get 2-3 quotes. Compare scope, brand specifications, and warranty terms, not just the headline price. The cheapest quote often skips parts or uses budget brands that fail in 18 months.
Typically travel time, fuel, the first 15-30 minutes on site, and basic diagnostic work. Most plumbers credit the call-out against the repair cost if the customer proceeds with the job.
1.5x to 2x is industry standard for after-hours, weekends, and public holidays. The reason: out-of-hours work pulls the plumber away from their family and disrupts their normal schedule.
Keep going
More plumber resources
The full international pricing guide, ready-to-send templates, and the main plumbers page.
Full plumber pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Plumbers
Send branded quotes and invoices from your phone in 2 minutes. Built for plumbers.
Plumbing Quote Template
Itemised plumbing quote with call-out, parts, labour, disposal, and tax.
Testimonials
Trusted by tradespeople in Dublin
Real plumbers and other tradies in Dublin use QuoteGenio to quote and invoice from their phone.
“I used to send long email quotes that clients would ignore. Now I send a clean quote link and get responses much quicker.”
Emily Carter
Freelance Designer · London
“The templates look incredibly professional. My clients in Italy are always impressed by the branding. Huge time saver.”
Sofia Ricci
Interior Designer · Milan
“Converting a quote to an invoice in one click saves me so much time. Payment tracking is brilliant. I can see immediately who still owes me.”
Thabo Nkomo
HVAC Technician · Midrand
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.