Paving contractor pricing in New York City
What paving contractors charge in New York City (typically $45-$100/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
New York City paving contractor pricing
What paving contractors should charge in New York City
NYC paving work is dominated by Brooklyn brownstone backyards and patios, Manhattan terrace pavers (with weight-load and drainage engineering), Queens and Staten Island driveways, and commercial sidewalk repair. NYC DOT sidewalk repair is required by city law within 75 days of inspection notice. Permitting through DOB and DOT for street-facing work. Bluestone, granite, brick, and concrete are the typical materials. Co-op board approval for terrace pavers adds 6-12 weeks.
Hourly rate
$45-$100
per hour, weekday daytime
Call-out fee
$31-$68
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common paving contractor jobs in New York City
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in USD.
Site visit and measure
What's included
Most paving contractors measure free for jobs over $2,000. Detailed scope and drainage plans may be charged.
Concrete pavers (per sqm, installed)
What's included
Standard 60mm interlocking concrete pavers. Includes excavation, sub-base, sand bed, and laying. Edging extra.
Permeable pavers (per sqm)
What's included
Allow water through to reduce runoff. Often required by council for new driveways. Higher unit cost, lower drainage cost.
Porcelain pavers (per sqm)
What's included
Premium look, ultra-low maintenance. Includes 20mm porcelain on concrete or screed bed. Pedestal install for rooftops extra.
Natural stone (per sqm)
What's included
Bluestone, travertine, sandstone, or granite. Includes stone, screed bed, grout, and labour. Premium for honed or sawn finishes.
Residential driveway (40-60 sqm)
What's included
Depends on paver choice and site difficulty. Includes excavation, sub-base, drainage if needed, and edging.
Patio (20-30 sqm)
What's included
Depends on paver choice. Includes excavation, base, and laying. Excludes pergola, lighting, and furniture.
Garden path (per linear m, 1m wide)
What's included
Includes excavation, sub-base, paver or stepping stone, and edging. Curved paths cost more.
Repointing existing paving (per sqm)
What's included
Removes failed joint sand, sweeps polymeric sand, seals. Refreshes a 10-year-old patio without full relay.
New York City quote factors
What to factor into your New York City paving contractor quote
Local context that should shape what you quote as a paving contractor in New York City. Humid continental. Cold snowy winters (December-March, often below freezing), hot humid summers (July-August often above 90°F), coastal exposure on Manhattan/Brooklyn/Queens waterfronts. Hurricane Sandy flood-zone retrofits ongoing. Pipes freeze in winter, AC load peaks in July.
NYC DOT sidewalk repair
NYC property owners are required to repair adjacent sidewalks within 75 days of NYC DOT inspection notice. Quote per-sqft installed ($15-$35 for standard concrete, $40-$120 for bluestone or granite) with DOT permit ($200-$500) as separate line. Single-family homeowners and small property managers drive recurring volume; build relationships with 10-20 property managers.
Brooklyn brownstone backyard pavers
Brooklyn brownstone (Heights, Park Slope, Cobble Hill, Carroll Gardens, Bed-Stuy, Fort Greene) backyards drive volume work. Quote per-sqft installed: bluestone $35-$85; granite $40-$110; brick $25-$55; permeable concrete $20-$45. Typical 300-600sqft brownstone backyard runs $15,000-$55,000+ depending on material and complexity.
Manhattan terrace pavers with engineering
Manhattan terrace pavers need structural engineer's letter (weight-load), drainage layer, and root barrier for any planted areas. Quote engineer ($2,500-$10,000), drainage ($15-$40/sqft), and pedestal-paver system (premium dry-laid on pedestals for proper drainage) at $50-$120/sqft installed. Co-op board approval (6-12 weeks) on top.
Queens and Staten Island driveways
Queens (Forest Hills, Forest Hills Gardens, Jackson Heights, Long Island City) and Staten Island driveways drive volume. Quote per-sqft installed: standard concrete $8-$15; asphalt $4-$10; pavers (interlocking concrete, bluestone, brick) $20-$50. Driveway projects $5,000-$25,000+ depending on size and material.
Permitting and engineering line items
NYC DOT sidewalk permit ($200-$500), DOB filing for terrace work ($800-$5,000), structural engineer for terrace pavers ($2,500-$10,000), and LPC approval for landmarked sidewalks ($2,500-$15,000) as separate lines. State permitting timeline (4-12 weeks for DOT, 6-12 weeks for DOB) on the contract.
Commercial sidewalk and ADA compliance
Commercial sidewalk repair must comply with ADA (Americans with Disabilities Act) requirements: 4ft minimum clear width, curb cuts at corners, detectable warning surfaces. Quote ADA-compliant repair at premium ($25-$60/sqft) vs standard ($15-$35/sqft). Property managers prioritize ADA compliance to avoid lawsuits.
Sample quote
A real New York City paving contractor quote you can copy
Residential driveway, 55sqm, premium concrete pavers, charcoal. Replace the line items and rates with your own; the structure stays.
Site excavation (200mm depth), debris removal to landfill
150mm CBR-tested crushed rock sub-base, compacted in 75mm lifts
30mm screed bed (sand)
Adbri Euro Stone Driveway Charcoal pavers (200x100x60, stretcher bond)
Concrete haunch edging (perimeter, 28 linear m)
Drainage connection to existing stormwater (2 linear m)
Polymeric joint sand, brush and water-set
Project labour (4 days, 2-person team, including site clean)
FAQ
New York City paving contractor pricing questions, answered
Common questions about paving contractor pricing in New York City, with answers framed for tradies pricing their own work.
Per-sqft installed: standard concrete $8-$15 driveway, $15-$35 sidewalk; asphalt $4-$10; bluestone $35-$85; granite $40-$110; brick $25-$55; permeable concrete $20-$45. Manhattan terrace pavers $50-$120/sqft with engineering and drainage. Quote DOT permit and DOB filing as separate lines.
$15-$35/sqft for standard concrete sidewalk repair, $40-$120/sqft for bluestone or granite. NYC DOT permit ($200-$500) as separate line. Property owners are required to repair within 75 days of NYC DOT inspection notice; volume work drives recurring revenue. Build relationships with 10-20 property managers.
$15,000-$55,000+ for typical 300-600sqft brownstone backyard depending on material and complexity. Quote per-sqft: bluestone $35-$85; granite $40-$110; brick $25-$55; permeable concrete $20-$45. Add drainage ($15-$40/sqft), excavation, sub-base, edge restraints as separate lines.
Yes, on every Manhattan terrace project. Terrace pavers need structural engineer's letter (weight-load), drainage layer, and root barrier for any planted areas. Quote engineer ($2,500-$10,000), drainage ($15-$40/sqft), and pedestal-paver system at $50-$120/sqft installed. Co-op board approval (6-12 weeks) on top.
$8-$15/sqft for standard concrete, $4-$10/sqft for asphalt, $20-$50/sqft for pavers (interlocking concrete, bluestone, brick). Typical driveway projects $5,000-$25,000+ depending on size and material. Forest Hills Gardens premium tier accepts $30-$60/sqft for premium bluestone or brick installations.
Per square metre rates are $80 to $280 installed in the US, depending on paver type. Hourly rates ($45-95) only apply for repairs and small remediation work. Most paving contractors quote fixed-price per sqm with adders for pattern, edging, and drainage.
Concrete is cheaper ($25/sqm material), softer, may need re-sealing every 3-5 years, and weathers over time. Porcelain is more expensive ($80/sqm+), harder, requires no sealing, and looks like-new at year 20. Concrete dominates driveways; porcelain dominates patios and pools.
A driveway over poor sub-base sinks 30-100mm over 5 years, cracks pavers, and pools water. Quality sub-base (100-150mm of CBR-tested crushed rock, compacted in lifts) keeps the surface flat for 20+ years. Most failed paving traces to sub-base, not the pavers.
Yes, 2-3 quotes for any paving over $3,000. Compare paver brand, sub-base depth, edging spec, and drainage approach. The cheapest quote almost always cuts sub-base or skips edging, both of which fail within 3-5 years.
If the driveway connects to a public road or changes a council kerb crossing, almost always yes. Council layback permits are $250-1,200 depending on region. The paving contractor should include this in the quote, not hide it.
Keep going
More paving contractor resources
The full international pricing guide, ready-to-send templates, and the main paving contractors page.
Full paving contractor pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Paving contractors
Send branded quotes and invoices from your phone in 2 minutes. Built for paving contractors.
Paving Contractor Quote Template
Paving quote with sub-base, laying course, paver brand, edge restraint, and jointing.
Testimonials
Trusted by tradespeople in New York City
Real paving contractors and other tradies in New York City use QuoteGenio to quote and invoice from their phone.
“Clients love how professional the quotes look. Feels like I upgraded my whole business overnight. The mobile app is a lifesaver.”
Jessica Martinez
HVAC Contractor · Austin, TX
“Roofs are not cheap. Having itemised quotes with labour and materials split helps clients trust my pricing. My acceptance rate has gone up noticeably.”
Marco Davids
Roofer · Cape Town
“My quotes look a lot more professional now. Clients take them seriously and I spend less time formatting documents.”
Megan Daniels
Interior Designer · Birmingham
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.