HVAC technician pricing in Kilkenny
What hvac technicians charge in Kilkenny (typically €65-€165/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Kilkenny HVAC technician pricing
What hvac technicians should charge in Kilkenny
Kilkenny HVAC technicians work the largest oil-to-heat-pump retrofit market in the south east, driven by SEAI grants (heat pump EUR6,500, solar PV EUR1,800) and limited GNI reticulated natural gas coverage. RGI for gas, F-Gas Category I for refrigerant work, and IRHACE (Irish Refrigeration and HVAC Engineering) membership are the trust signals. Building Regs Part L (NZEB since 2019), Part F (ventilation), and Part J (heat producing appliances) apply. BER assessment mandatory pre and post.
Hourly rate
€65-€165
per hour, weekday daytime
Call-out fee
€46-€98
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common HVAC technician jobs in Kilkenny
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in EUR.
Standard call-out
What's included
Includes first 30 min diagnostic. Credited against repair on most jobs.
Annual aircon service (split system)
What's included
Includes filter clean, coil clean, refrigerant pressure check, drain check, and 1-2 hour labour.
Refrigerant top-up (R32 or R410A)
What's included
Includes refrigerant, leak check, and 1-2 hour labour. Continued leaks need full leak repair (priced separately).
Split system install (2.5 to 3.5kW)
What's included
Includes wall-mount indoor unit, outdoor unit, 5m pipe run, electrical connection, and commissioning.
Split system install (5 to 7kW)
What's included
Larger unit, may need dedicated 20A circuit. Pipe runs >8m, multi-storey, or roof mount add cost.
Ducted system install (3-bed home)
What's included
Includes 10-14kW outdoor unit, zoned ducting, vents, controller, electrical. Concealed roof-space install.
Aircon repair (compressor or fan motor)
What's included
Depends on part. Compressor at the high end and may be uneconomic on units over 8 years old.
Commercial chiller service (per unit)
What's included
Quarterly service plan. Multi-unit sites get bulk pricing. Excludes parts and refrigerant.
Emergency call-out (after hours)
What's included
Typical 6pm-7am, weekends, public holidays. State multiplier on quote.
Kilkenny quote factors
What to factor into your Kilkenny HVAC technician quote
Local context that should shape what you quote as a HVAC technician in Kilkenny. Mild oceanic Atlantic (slightly drier than west coast). Mild winters (Dec-Feb, 3-8°C, occasional frost, rare snow), cool summers (June-Aug, 15-20°C, occasional 25°C+ heatwaves), moderate rainfall (~900mm/year), strong wind. No coastal exposure.
RGI + F-Gas + IRHACE credentials
RGI (Registered Gas Installer) is mandatory for gas work. F-Gas Category I certification is mandatory for refrigerant handling on heat pumps and air con. IRHACE (Irish Refrigeration and HVAC Engineering) membership is the trust signal at the premium tier. Print all three credentials on every quote and invoice. CPD and renewal required.
Air-to-water heat pump retrofit specialty
Kilkenny has the largest oil-to-heat-pump retrofit market in the south east. SEAI grant of EUR6,500 plus limited GNI gas coverage drives demand. Quote air-to-water heat pump install (Mitsubishi Ecodan, Daikin Altherma, NIBE F2120, Stiebel Eltron WPL) at EUR13,000-EUR21,000 before grant; EUR6,500-EUR14,500 net after SEAI. Includes BER assessment (EUR150-EUR300), heat loss survey, and Building Regs Part L compliance.
Oil tank removal + system flush
Oil-to-heat-pump conversion requires oil tank decommissioning (EUR450-EUR950 including bunded tank disposal), full system flush (EUR380-EUR850), low-temperature radiator upgrade or UFH retrofit (EUR3,500-EUR12,000), and DHW cylinder upgrade (EUR1,200-EUR2,800). Quote as a complete retrofit package; SEAI requires BER A3 minimum post-retrofit for full grant.
Heritage Medieval Mile constraints
Medieval Mile (R95), John Street (R95), Patrick Street (R95), High Street (R95), and Greenshill (R95) Section 57 Protected Structures and ACA controls limit external heat pump unit siting (visual impact), internal ductwork (heritage fabric), and refrigerant pipe routing. Quote concealed-route premium (EUR1,200-EUR3,500 over standard) and Architectural Conservation Officer consultation. Niche specialist work.
MVHR and ventilation Part F + Part L
NZEB Building Regs Part L (since 2019) drives MVHR (mechanical ventilation with heat recovery) demand on new builds and deep retrofits. Quote MVHR install (Zehnder, Vent-Axia, Brink, Aereco) at EUR4,500-EUR9,500 including ductwork and commissioning. Building Regs Part F airtightness test (EUR250-EUR450) is mandatory.
VAT 13.5% reduced rate
Ireland applies a 13.5% reduced VAT rate to construction services (vs 23% standard). State the rate on every quote and invoice. VAT registration is mandatory once turnover exceeds EUR42,500. Kilkenny rates run 25-30% below Dublin metro.
Sample quote
A real Kilkenny HVAC technician quote you can copy
Split-system aircon install, 5kW Daikin Cora, single-storey lounge. Replace the line items and rates with your own; the structure stays.
5kW Daikin Cora wall-split inverter (R32, 7-star, 5-year warranty)
Outdoor unit, mounting bracket, vibration isolators (ground level)
Pipe run (4m, lagged), drain line, low-voltage interconnect cable
Dedicated 15A circuit (existing DB board has spare way)
Vacuum, pressure test, refrigerant charge to spec, commissioning sheet
Installation labour (1 day, ARC-licensed technician + 2nd tradesperson)
Electrical CoC, refrigerant handling certificate
FAQ
Kilkenny HVAC technician pricing questions, answered
Common questions about hvac technician pricing in Kilkenny, with answers framed for tradies pricing their own work.
EUR50-EUR92/hr for standard residential HVAC in Kilkenny. EUR78-EUR140/hr for premium (Castlecomer Road R95, Bennettsbridge R95, Thomastown R95, Newpark R95, Medieval Mile R95). Specialist heat pump retrofit and MVHR commissioning EUR95-EUR175/hr. Print RGI, F-Gas Category I, and IRHACE credentials on every quote.
RGI is mandatory for gas work. F-Gas Category I certification is mandatory for refrigerant handling on heat pumps and air con. IRHACE membership is the trust signal at the premium tier. Print all three credentials on every quote and invoice. CPD and renewal required.
Yes, the defining Kilkenny market. SEAI grant of EUR6,500 plus limited GNI gas coverage drives demand. Quote air-to-water heat pump install (Mitsubishi Ecodan, Daikin Altherma, NIBE F2120, Stiebel Eltron WPL) at EUR13,000-EUR21,000 before grant; EUR6,500-EUR14,500 net after SEAI. Includes BER assessment, heat loss survey, and Building Regs Part L compliance.
Total package EUR18,000-EUR35,000 before SEAI; EUR11,500-EUR28,500 net after EUR6,500 grant. Includes air-to-water heat pump (EUR13,000-EUR21,000), oil tank decommissioning (EUR450-EUR950), system flush (EUR380-EUR850), low-temp radiator or UFH retrofit (EUR3,500-EUR12,000), and DHW cylinder upgrade (EUR1,200-EUR2,800). SEAI requires BER A3 minimum post-retrofit for full grant.
Yes, NZEB Building Regs Part L (since 2019) drives demand. Quote MVHR install (Zehnder, Vent-Axia, Brink, Aereco) at EUR4,500-EUR9,500 including ductwork and commissioning. Building Regs Part F airtightness test (EUR250-EUR450) is mandatory. Pairs naturally with heat pump and solar PV packages.
Hourly rates are €65 to €145 in the US, £55-130 in the UK, A€89-220 in Australia, R350-950 in South Africa, and C€65-180 in Canada. Metro areas typically command a 20-30% premium and refrigerant-certified technicians charge more than handymen offering aircon services.
A standard wall-split install is 4-6 hours for a 2-person team. A multi-head or ceiling-cassette install can take a full day. Ducted systems for a 3-bed home run 2-3 days including the electrical work.
For installs over €1,630, get 2-3 quotes. Compare brand, capacity, warranty, refrigerant type, and install detail. The cheapest quote often uses budget-brand units with 3-year warranties vs branded units with 5-7 year warranties for 10-20% more.
Heat-load calculation: roughly 0.15kW per square metre for moderate climates, 0.20kW for hot climates. A 25sqm bedroom needs 4-5kW; a 50sqm open-plan needs 7-9kW. Over-sized units cycle and fail; under-sized never reach setpoint. Insist on a heat-load calc.
Annually for residential use, twice yearly for high-use units or commercial. A €205 annual service catches refrigerant drift, dirty coils, and electrical issues before they become €1,220 repairs. Many manufacturer warranties require annual service to remain valid.
Keep going
More HVAC technician resources
The full international pricing guide, ready-to-send templates, and the main hvac technicians page.
Full HVAC technician pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for HVAC technicians
Send branded quotes and invoices from your phone in 2 minutes. Built for hvac technicians.
HVAC Quote Template
Itemised HVAC quote with refrigerant type, labour, leak test, and after-hours rate.
Testimonials
Trusted by tradespeople in Kilkenny
Real hvac technicians and other tradies in Kilkenny use QuoteGenio to quote and invoice from their phone.
“The biggest win for me is speed. I can quote while I am still with the client and not worry about doing it later.”
Jason Naicker
Electrician · New Delhi
“Solar is a long sales cycle. The quote activity tracking lets me see who has re-opened a quote so I know when to follow up. Very useful.”
Hannah Clarke
Solar Installer · Manchester
“I used to delay sending quotes because it took too long. Now I do it straight after the job and get faster responses.”
Warren Jacobs
Plumber · Geneva
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.