Paving contractor pricing in Atlanta
What paving contractors charge in Atlanta (typically $45-$100/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Atlanta paving contractor pricing
What paving contractors should charge in Atlanta
Atlanta paving work is dominated by Buckhead/Brookhaven/Sandy Springs estate driveways, suburban tract concrete driveways, pool deck pavers, and commercial parking lots. Georgia $2,500 threshold. ADA compliance for commercial.
Hourly rate
$45-$100
per hour, weekday daytime
Call-out fee
$31-$68
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common paving contractor jobs in Atlanta
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in USD.
Site visit and measure
What's included
Most paving contractors measure free for jobs over $2,000. Detailed scope and drainage plans may be charged.
Concrete pavers (per sqm, installed)
What's included
Standard 60mm interlocking concrete pavers. Includes excavation, sub-base, sand bed, and laying. Edging extra.
Permeable pavers (per sqm)
What's included
Allow water through to reduce runoff. Often required by council for new driveways. Higher unit cost, lower drainage cost.
Porcelain pavers (per sqm)
What's included
Premium look, ultra-low maintenance. Includes 20mm porcelain on concrete or screed bed. Pedestal install for rooftops extra.
Natural stone (per sqm)
What's included
Bluestone, travertine, sandstone, or granite. Includes stone, screed bed, grout, and labour. Premium for honed or sawn finishes.
Residential driveway (40-60 sqm)
What's included
Depends on paver choice and site difficulty. Includes excavation, sub-base, drainage if needed, and edging.
Patio (20-30 sqm)
What's included
Depends on paver choice. Includes excavation, base, and laying. Excludes pergola, lighting, and furniture.
Garden path (per linear m, 1m wide)
What's included
Includes excavation, sub-base, paver or stepping stone, and edging. Curved paths cost more.
Repointing existing paving (per sqm)
What's included
Removes failed joint sand, sweeps polymeric sand, seals. Refreshes a 10-year-old patio without full relay.
Atlanta quote factors
What to factor into your Atlanta paving contractor quote
Local context that should shape what you quote as a paving contractor in Atlanta. Hot humid subtropical. Hot humid summers (June-September, 90°F+ for 60+ days), mild winters (occasional freezes), severe weather March-May (tornados, thunderstorms, hailstorms). Pine pollen season March-April (covers everything in yellow). Termite pressure significant. Humidity drives mildew growth on shaded surfaces.
Georgia $2,500 paving threshold
Georgia does not require state-level paving contractor license for jobs under $2,500. Jobs over $2,500 require Georgia Construction license. State threshold on quotes.
Buckhead designer paving
Buckhead, Brookhaven, Sandy Springs customers favor Pennsylvania bluestone ($30-$80/sqft installed), brick ($22-$50/sqft), and natural stone ($25-$65/sqft). Premium designer projects $40-$120/sqft.
Suburban tract concrete driveway volume
Atlanta metro adds 60,000+ new housing units annually. Quote per-driveway pour ($3,500-$12,500 for 600-1,200sqft single-family driveway at builder portfolio rates).
Pool deck + outdoor integration
Atlanta long warm season drives pool deck demand. Quote per-sqft installed: pool coping (bluestone, travertine) $25-$75; pool deck pavers $20-$55. State R11 anti-slip rating on every pool surround quote.
Commercial parking lot + ADA
Downtown Atlanta, Midtown, Buckhead, Perimeter commercial parking lot work drives volume. Quote per-sqft installed: asphalt $4-$10; concrete $7-$14; commercial-grade with markings, lighting, drainage $25-$55/sqft. ADA accessibility at premium $25-$55/sqft.
Pine pollen + tree-root damage
Atlanta pine and oak roots damage concrete and asphalt within 5-10 years. Quote root-barrier install ($300-$1,200 per LF) and tree-root remediation on every project near mature trees.
Sample quote
A real Atlanta paving contractor quote you can copy
Residential driveway, 55sqm, premium concrete pavers, charcoal. Replace the line items and rates with your own; the structure stays.
Site excavation (200mm depth), debris removal to landfill
150mm CBR-tested crushed rock sub-base, compacted in 75mm lifts
30mm screed bed (sand)
Adbri Euro Stone Driveway Charcoal pavers (200x100x60, stretcher bond)
Concrete haunch edging (perimeter, 28 linear m)
Drainage connection to existing stormwater (2 linear m)
Polymeric joint sand, brush and water-set
Project labour (4 days, 2-person team, including site clean)
FAQ
Atlanta paving contractor pricing questions, answered
Common questions about paving contractor pricing in Atlanta, with answers framed for tradies pricing their own work.
Per-sqft installed: standard concrete driveway $6-$12; asphalt $4-$10; standard concrete pavers $12-$28; Pennsylvania bluestone $30-$80; brick $22-$50; natural stone $25-$65. Buckhead premium of 25-40% above standard.
Not for jobs under $2,500. Jobs over $2,500 require Georgia Construction license. State threshold on quotes.
Typical 60-100sqft driveway runs $4,500-$25,000 depending on material. Quote separately: excavation and disposal, sub-base, sand bedding, pavers/concrete, edging restraints, jointing and sealing.
Buckhead, Brookhaven, Sandy Springs favor Pennsylvania bluestone ($30-$80/sqft installed), brick ($22-$50/sqft), and natural stone ($25-$65/sqft). State stone origin, finish, and cut on the quote.
Yes, Atlanta metro adds 60,000+ new housing units annually. Quote per-driveway pour ($3,500-$12,500 for 600-1,200sqft single-family driveway at builder portfolio rates). Build relationships with 5-10 production builders.
Per square metre rates are $80 to $280 installed in the US, depending on paver type. Hourly rates ($45-95) only apply for repairs and small remediation work. Most paving contractors quote fixed-price per sqm with adders for pattern, edging, and drainage.
Concrete is cheaper ($25/sqm material), softer, may need re-sealing every 3-5 years, and weathers over time. Porcelain is more expensive ($80/sqm+), harder, requires no sealing, and looks like-new at year 20. Concrete dominates driveways; porcelain dominates patios and pools.
A driveway over poor sub-base sinks 30-100mm over 5 years, cracks pavers, and pools water. Quality sub-base (100-150mm of CBR-tested crushed rock, compacted in lifts) keeps the surface flat for 20+ years. Most failed paving traces to sub-base, not the pavers.
Yes, 2-3 quotes for any paving over $3,000. Compare paver brand, sub-base depth, edging spec, and drainage approach. The cheapest quote almost always cuts sub-base or skips edging, both of which fail within 3-5 years.
If the driveway connects to a public road or changes a council kerb crossing, almost always yes. Council layback permits are $250-1,200 depending on region. The paving contractor should include this in the quote, not hide it.
Keep going
More paving contractor resources
The full international pricing guide, ready-to-send templates, and the main paving contractors page.
Full paving contractor pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Paving contractors
Send branded quotes and invoices from your phone in 2 minutes. Built for paving contractors.
Paving Contractor Quote Template
Paving quote with sub-base, laying course, paver brand, edge restraint, and jointing.
Testimonials
Trusted by tradespeople in Atlanta
Real paving contractors and other tradies in Atlanta use QuoteGenio to quote and invoice from their phone.
“My clients respond faster to professional PDF quotes. Being able to send via WhatsApp means they do not need to check email. I am closing more jobs.”
Sarah Wilson
Designer · London
“Clients love how professional the quotes look. Feels like I upgraded my whole business overnight. The mobile app is a lifesaver.”
Jessica Martinez
HVAC Contractor · Austin, TX
“Roofs are not cheap. Having itemised quotes with labour and materials split helps clients trust my pricing. My acceptance rate has gone up noticeably.”
Marco Davids
Roofer · Cape Town
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.