Fencing contractor pricing in Newcastle
What fencing contractors charge in Newcastle (typically £28-£65/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Newcastle fencing contractor pricing
What fencing contractors should charge in Newcastle
Newcastle fencing is dominated by Tyneside flat shared rear-garden boundary fencing (often disputed), Jesmond and Gosforth Victorian/Edwardian timber feather-edge restoration, Darras Hall ultra-premium estate ironwork and modern aluminium, student rental privacy fencing, and Quayside commercial security. Planning required for fences over 2m height (Newcastle City Council); listed-building consent required in Grainger Town and conservation areas. North Sea wind exposure drives wind-load specification stricter than southern UK. Freeze-thaw cycles drive post-replacement cycle.
Hourly rate
£28-£65
per hour, weekday daytime
Call-out fee
£20-£42
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common fencing contractor jobs in Newcastle
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in GBP.
Site visit and quote
What's included
Most fencing contractors quote free for jobs over £620. Detailed scope and topographic surveys may be charged.
Timber paling fence (per linear m, 1.8m)
What's included
Includes posts, rails, palings, fixings, and labour. Premium hardwood palings cost more.
Colorbond sheet fence (per linear m, 1.8m)
What's included
Includes posts, rails, sheets, capping, and labour. Colour and gauge affect price.
Aluminium slat fence (per linear m)
What's included
Includes powder-coated slats, posts, rails, fixings, and labour. Premium look with horizontal slats or wood-grain finish.
Palisade fence (per linear m, 2.4m)
What's included
Includes galvanised steel posts, pales, top spike, and labour. Security-grade with anti-climb at the top.
Pool fence (per linear m, glass)
What's included
Includes 12mm toughened glass, spigot or channel fixings, and labour. Pool compliance certified at the top.
Gate (single pedestrian, standard)
What's included
Includes gate, hardware, lock or latch, and 1-2 hour labour. Wider or motorised gates cost more.
Motorised driveway gate (double swing)
What's included
Includes gate, motor, sensors, remote, and 1-2 day install. Slide gate and steel cantilever at the top.
Old fence removal + disposal (per m)
What's included
Includes demolition, debris removal to landfill. Concrete-set posts cost more than pine pickets.
Newcastle quote factors
What to factor into your Newcastle fencing contractor quote
Local context that should shape what you quote as a fencing contractor in Newcastle. Cold continental with North Sea wind exposure. ~640mm rainfall per year, cold winters with frequent freezes (more than southern UK cities), gales common off the North Sea, late short summers. Wind exposure drives weatherproofing, gutter, and roofing trade demand.
Newcastle planning for fences over 2m
Newcastle City Council and Northumberland County Council (Darras Hall) require planning permission for fences over 2m height (or 1m if facing a highway). Quote planning application (£258 householder) and architect's drawings (£450-£1,500) as separate lines. Listed-building consent required in Grainger Town and Jesmond conservation areas (£0 fee but 12-16 week approval). Print planning status on every quote.
North Sea wind-load specification
North Sea wind exposure (frequent gales, Beaufort 8+ several times per winter) drives stricter wind-load specification than southern UK cities. Quote concrete-set posts (£35-£85 per post premium over driven posts), wind-uplift fixings, and feather-edge or close-board panels (no waney-edge or trellis tops on exposed sites). State 'North Sea wind-zone fixing' on every exposed-site quote (Tynemouth, Whitley Bay, Northumberland coastal).
Per-metre tiered pricing
Standard feather-edge or close-board: £55-£115/LM installed. Wood concrete-post and gravel-board: £85-£165/LM. Composite (Composite Prime, Ecoscape): £125-£245/LM. Aluminium horizontal slat: £165-£385/LM. Custom ornamental ironwork: £245-£650/LM. Chain-link: £35-£85/LM. Premium postcodes (Jesmond NE2, Gosforth NE3, Darras Hall NE20) command 25-40% premium. State VAT 20% separately.
Tyneside flat shared-boundary disputes
Tyneside flats (Heaton, Byker, Walker, Wallsend) have shared rear gardens with upper-flat and lower-flat owners often disagreeing on fencing. Quote shared-fence work with written upper-flat/lower-flat agreement and 50/50 cost split signed before starting. State the split agreement on the contract. Boundary disputes are the #1 dispute driver in Tyneside flat work; clear paperwork avoids escalation.
Darras Hall estate ironwork tier
Darras Hall (NE20 Ponteland) and Gosforth (NE3) estate fencing favours custom ornamental ironwork (£245-£650/LM) with security gates (£3,500-£15,000+ per gate including motorisation), powder-coated aluminium horizontal slat, and bespoke designer fencing. Quote design fee separately (£1,500-£6,500); the design IP is yours. Darras Hall HNW clients (footballer enclave) accept premium pricing readily.
Freeze-thaw post-replacement cycle
Newcastle freeze-thaw cycles (more than southern UK) drive faster post deterioration than London or Manchester. Quote concrete-set posts at 600mm depth minimum (frost line 450-600mm Newcastle area) on every contract. Standard 450mm posts heave in spring thaw and require costly replacement. Premium customers in Darras Hall and Gosforth accept the premium for longevity.
Sample quote
A real Newcastle fencing contractor quote you can copy
Side fence, 28m, 1.8m high Colorbond Trimdek, including 1 pedestrian gate. Replace the line items and rates with your own; the structure stays.
Old fence removal and disposal (28m)
Concrete-set posts (15 posts at 2m spacing, 600mm deep, 75x75mm)
Colorbond Trimdek sheet 1.8m high, customer-choice Surfmist colour (28m)
Top capping, base channel, fixings
Pedestrian gate 900x1800mm matching Colorbond + drop bolt
Installation labour (3 days, 2-person team)
Site clean, finishing trim, customer handover
FAQ
Newcastle fencing contractor pricing questions, answered
Common questions about fencing contractor pricing in Newcastle, with answers framed for tradies pricing their own work.
Per-LM installed: chain-link £35-£85; feather-edge or close-board £55-£115; wood concrete-post and gravel-board £85-£165; composite (Composite Prime, Ecoscape) £125-£245; aluminium horizontal slat £165-£385; custom ornamental ironwork £245-£650. Premium postcodes (Jesmond NE2, Gosforth NE3, Darras Hall NE20) command 25-40% premium. State VAT 20% separately and planning status on every fence over 2m height.
Fences over 2m height (or 1m if facing a highway). Newcastle City Council and Northumberland County Council (Darras Hall) require planning permission. Quote planning application (£258 householder) and architect's drawings (£450-£1,500) as separate lines. Listed-building consent required in Grainger Town and Jesmond conservation areas (£0 fee but 12-16 week approval). Print planning status on every quote.
600mm minimum concrete-set (frost line 450-600mm Newcastle area). Newcastle freeze-thaw cycles (more than southern UK) drive faster post deterioration than London or Manchester. Standard 450mm posts heave in spring thaw and require costly replacement. State post depth on every contract. Premium customers in Darras Hall and Gosforth accept the premium for longevity.
Quote concrete-set posts (£35-£85 per post premium over driven posts), wind-uplift fixings, and feather-edge or close-board panels (no waney-edge or trellis tops on exposed sites). State 'North Sea wind-zone fixing' on every exposed-site quote (Tynemouth, Whitley Bay, Northumberland coastal). North Sea wind exposure drives stricter wind-load specification than southern UK cities.
Quote shared-fence work with written upper-flat/lower-flat agreement and 50/50 cost split signed before starting. State the split agreement on the contract. Tyneside flats (Heaton, Byker, Walker, Wallsend) have shared rear gardens with upper-flat and lower-flat owners often disagreeing on fencing; boundary disputes are the #1 dispute driver. Clear paperwork avoids escalation.
Per-metre installed rates: timber £50-180/m, Colorbond £81-250/m, aluminium slat £125-350/m, palisade £155-450/m. Glass pool fence runs £175-550/m. These are 1.8m heights; add 20-30% per extra 600mm of height.
Colorbond is steel sheet with baked-on colour, lasts 20-40 years, never needs painting, costs 40-60% more than timber. Timber lasts 12-25 years, needs oiling or staining every 3-5 years, costs less upfront. Colorbond wins on lifetime cost; timber wins on aesthetics and immediate budget.
For fencing over £1,240, get 2-3 quotes. Compare material grade, post setting method, height, gate spec, and warranty. The cheapest quote often skips concrete posts, uses sub-grade material, or omits gate hardware.
In most regions, boundary fences are joint property between neighbours; you both pay 50/50 for replacement. Get neighbour sign-off in writing BEFORE quoting work. Some regions have legislated fencing cost-sharing.
Yes for front-yard fences over 1.2m, pool fences (compliance certificate), and many security fences. The contractor should know your local rules and quote any approvals as line items.
Keep going
More fencing contractor resources
The full international pricing guide, ready-to-send templates, and the main fencing contractors page.
Full fencing contractor pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Fencing contractors
Send branded quotes and invoices from your phone in 2 minutes. Built for fencing contractors.
Fencing Contractor Quote Template
Fencing quote with linear metre rate, posts, footings, gates, and old-fence removal.
Testimonials
Trusted by tradespeople in Newcastle
Real fencing contractors and other tradies in Newcastle use QuoteGenio to quote and invoice from their phone.
“Steel fabrication quotes are technical. Clients appreciate when line items are clear and VAT is shown properly. Feels more like dealing with a real business.”
Matthias Schulz
Steel Fabricator · Hamburg
“Simple, fast, and easy to use. I can create and send quotes in minutes without overcomplicating things.”
Sophie Williams
Freelancer · Glasgow
“The statements feature is brilliant for my monthly retainer clients. Everything looks polished and my clients pay faster.”
Aoife O'Sullivan
Landscape Designer · Dublin
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.