Carpenter pricing in Victoria (BC)
What carpenters charge in Victoria (BC) (typically C$55-C$110/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Victoria (BC) carpenter pricing
What carpenters should charge in Victoria (BC)
Victoria BC carpenters serve Oak Bay/Rockland/Uplands/James Bay premium custom kitchens, pre-1920 heritage Victorian/Edwardian restoration (gingerbread, bay windows, leaded windows, wraparound porches, period millwork), Empress Hotel + Parliament Buildings heritage commercial, UVic + Royal Roads + Camosun institutional, and retiree accessibility retrofits. ITA BC carpentry journeyman ticket; WorkSafeBC mandatory. BC Housing builder licence for new home work. Custom kitchens CAD $1,500-$4,500+ per linear metre at top tier. Old-growth Vancouver Island cedar and Douglas fir restoration niche from pre-1920 housing.
Hourly rate
C$55-C$110
per hour, weekday daytime
Call-out fee
C$39-C$83
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common carpenter jobs in Victoria (BC)
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in CAD.
Door rehang or adjustment
What's included
Includes plane, hinge adjustment, latch alignment, and 1-2 hours labour.
Door replacement (hollow core)
What's included
Includes door, frame adjustment, hinges, latch, and 2-3 hours labour. Solid timber doors add cost.
Skirting board install (per linear m)
What's included
Includes timber, mitre cuts, fixing, and prep for paint. Wide profile and hardwood cost more.
Built-in wardrobe (per linear m)
What's included
Includes carcass, shelves, hanging rail, doors, soft-close hardware, and 2-3 days labour.
Decking (per square metre)
What's included
Includes joists, decking boards (pine or hardwood), screws, and labour. Hardwood and balustrade add cost.
Pergola (3x3m)
What's included
Includes posts, beams, rafters, fixings, and 3-5 days labour. Roof coverings priced separately.
Floor sanding and finish (per sqm)
What's included
Includes sand, stain (optional), and 2-3 coats poly. Engineered floors cost more.
Custom kitchen carcass (per linear m)
What's included
Includes melamine or veneer carcass, shelves, hinges, soft-close. Doors and bench-tops priced separately.
Daily labour (qualified carpenter)
What's included
Standard 8-hour day. Apprentice + qualified pair runs higher.
Victoria (BC) quote factors
What to factor into your Victoria (BC) carpenter quote
Local context that should shape what you quote as a carpenter in Victoria (BC). Marine west coast (mildest Canadian). Mild winters (Dec-Feb, 3-9°C, rare frost/snow), warm summers (June-Aug, 18-24°C, rarely above 28°C), moderate rainfall ~620mm/year (Olympic Mountain rain shadow). No snow load. Cascadia subduction seismic risk.
ITA BC carpentry ticket + WorkSafeBC
ITA BC carpentry journeyman ticket (Red Seal preferred) is the regional trust signal; WorkSafeBC coverage mandatory. BC Housing builder licence required for any new home work. Print ITA ticket + WorkSafeBC account number on every quote. CHBA Vancouver Island membership differentiates at premium tier.
Premium tier custom kitchen
Oak Bay (V8R/V8S), Rockland (V8S), Uplands (V8S), James Bay (V8V), Fairfield (V8V), Cordova Bay (V8Y), Cadboro Bay (V8N) custom kitchens command CAD $1,800-$4,500+ per linear metre with imported European cabinets (Boffi, Bulthaup, Poliform, Snaidero) or top Canadian brands (AyA Kitchens, Cuisines Laurier, Downsview Kitchens). Mid-tier Victoria BC CAD $1,000-$2,000/LM. Heritage Victorian millwork specialist CAD $400-$850/day.
Pre-1920 heritage Victorian/Edwardian restoration
Pre-1920 Victoria housing (James Bay V8V, Old Town V8W, Inner Harbour HCD, Rockland V8S, Fairfield V8V, Oak Bay V8R/V8S) drives heritage restoration. Victoria HCDs + BC Heritage Conservation Act + Oak Bay heritage bylaws mandate heritage-sympathetic work. Quote specialist period-correct millwork (Victorian bay windows, gingerbread bargeboards, fretwork, finials, picture rails, panel doors, leaded-glass casings, cedar shingle siding) at CAD $120-$285/hr. Niche; build portfolio.
FSC-certified + Vancouver Island timber
BC sustainability culture + Energy Step Code drive demand for FSC-certified lumber and Vancouver Island timber (Western Red Cedar, Douglas fir, hemlock, yellow cedar). Quote sustainable lumber premium (CAD $4-$10/sqft over standard) and locally-milled Vancouver Island cedar (CAD $10-$28/BF for clear cedar) as separate spec. Premium clients pay readily for sustainability story aligned with CleanBC.
Old-growth Vancouver Island cedar restoration
Pre-1920 Victoria housing has significant old-growth Vancouver Island cedar siding, shingles, and structural timber. Quote old-growth cedar restoration at premium (CAD $235-$455/hr for specialist work) with sourced-to-match cedar. Niche; build portfolio. Some clients seek certified-reclaimed old-growth cedar (CAD $25-$60/BF) from Vancouver Island reclaim suppliers.
Retiree accessibility carpentry
Victoria BC retiree concentration drives accessibility carpentry demand: widened doorways, lever hardware, custom ramps and entries, lowered cabinets, pull-out drawers, accessible kitchens. Quote accessibility carpentry at CAD $70-$135/hr with separate spec for grab-bar blocking, threshold reductions, and barrier-free shower frames. BC Building Accessibility Handbook informs spec. Build referral relationships with occupational therapists.
Sample quote
A real Victoria (BC) carpenter quote you can copy
Built-in wardrobe, 3.6 linear metres, sliding doors, premium finish. Replace the line items and rates with your own; the structure stays.
Melamine carcass (3.6m, 600mm deep, 2.4m high, edge-banded)
Shelving, hanging rails, drawer runners (Hettich soft-close x4)
Sliding doors (3 panel, mirror + melamine combination, aluminium track)
Site measure, delivery, install (2 days, 2-person team)
Skirting cut-in, scribe to wall, silicon seal
Finish (laminated, ready to use, no paint required)
FAQ
Victoria (BC) carpenter pricing questions, answered
Common questions about carpenter pricing in Victoria (BC), with answers framed for tradies pricing their own work.
CAD $58-$110/hr for general carpentry in standard Victoria BC, or CAD $450-$800/day. CAD $90-$220/hr for premium tier work (Oak Bay V8R/V8S, Rockland V8S, Uplands V8S, James Bay V8V, Fairfield V8V, Cordova Bay V8Y, Cadboro Bay V8N). CAD $120-$285/hr for pre-1920 heritage Victorian/Edwardian restoration. CAD $235-$455/hr for old-growth Vancouver Island cedar restoration. Heritage millwork specialist CAD $400-$850/day. Custom kitchen CAD $1,000-$4,500+ per linear metre. Victoria BC pricing typically sits 10-20% below Vancouver. State ITA BC ticket + WorkSafeBC on every quote.
Yes, ITA BC carpentry journeyman ticket (Red Seal preferred) is the regional trust signal. WorkSafeBC coverage mandatory. BC Housing builder licence required for any new home work. Print ITA ticket + WorkSafeBC account number on every quote. CHBA Vancouver Island membership differentiates at premium tier.
CAD $1,800-$4,500+ per linear metre for imported European cabinets (Boffi, Bulthaup, Poliform, Snaidero) or top Canadian brands (AyA Kitchens, Cuisines Laurier, Downsview Kitchens). Quote separately: design fee (CAD $7,000-$32,000), cabinets, hardware (Blum, Hettich), stone tops, appliances, installation. Lead time 14-22 weeks for European imports to Vancouver Island via Port of Vancouver.
Yes, niche premium revenue. Pre-1920 Victoria housing (James Bay V8V, Old Town V8W, Inner Harbour HCD, Rockland V8S, Fairfield V8V, Oak Bay V8R/V8S) drives heritage restoration. Victoria HCDs + BC Heritage Conservation Act + Oak Bay heritage bylaws mandate heritage-sympathetic work. Quote period-correct millwork (Victorian bay windows, gingerbread bargeboards, fretwork, finials, picture rails, panel doors, leaded-glass casings, cedar shingle siding) at CAD $120-$285/hr. Build portfolio.
Yes, on every premium project. BC sustainability culture + Energy Step Code drive demand for FSC-certified lumber and locally-milled Vancouver Island timber (Western Red Cedar, Douglas fir, hemlock, yellow cedar). Quote sustainable lumber premium (CAD $4-$10/sqft over standard) and locally-milled Vancouver Island cedar (CAD $10-$28/BF for clear cedar) as separate spec. Premium clients pay readily for sustainability story aligned with CleanBC.
Hourly rates are $55 to $100 in the US, £30-75 in the UK, A$65-130 in Australia, R250-650 in South Africa, and C$55-110 in Canada. Most carpenters prefer to quote fixed-price for custom work and reserve hourly for repairs and adjustments.
A general carpenter does framing, decking, and structural work. A finish carpenter does cabinets, built-ins, trim, and stair work where every joint shows. Finish carpenters typically charge 20-40% more because the detail tolerance is millimetres, not centimetres.
For custom work over $2,000, get 2-3 quotes. Compare materials, hardware brand, finish level, and warranty, not just the headline price. The cheapest quote often skips hardware or uses budget materials that fail in 5 years.
30% on signing is standard for custom work over $1,000, with the balance paid on install. The deposit covers materials the carpenter has to order and cannot return.
Usually no. Carpenters buy timber and hardware at trade pricing 15-30% below retail. Bringing your own also voids most workmanship guarantees because the carpenter cannot vouch for the substrate.
Keep going
More carpenter resources
The full international pricing guide, ready-to-send templates, and the main carpenters page.
Full carpenter pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Carpenters
Send branded quotes and invoices from your phone in 2 minutes. Built for carpenters.
Carpenter Quote Template
Carpenter quote with board spec, hinge brand, drawer count, and snag visit.
Testimonials
Trusted by tradespeople in Victoria (BC)
Real carpenters and other tradies in Victoria (BC) use QuoteGenio to quote and invoice from their phone.
“I use it daily. Swift, multi-currency, and works perfectly on my phone. Worth every krona.”
Oscar Bergström
Handyman · Stockholm
“Simple pricing, no hidden fees. The free plan was enough to try it out and I upgraded within the first week. Well worth it.”
André Pretorius
Tiler · Stellenbosch
“Fast, modern, and my customers love the clean look of the quotes. Perfect for small trade businesses.”
Lukas Becker
Electrician · Berlin
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.