Roofer pricing in Invercargill
What roofers charge in Invercargill (typically $65-$145/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Invercargill roofer pricing
What roofers should charge in Invercargill
Invercargill roofing is dominated by long-run Colorsteel and Decramastic on standard timber stock, slate and decorative tile on Heritage Edwardian Dee Street and Tay Street Conservation Area stock (Tisbury Speedway Centre architecture features ornate roofs), Healthy Homes Standards 2019 insulation retrofit work, and persistent strong cold southerly wind driving above-average flashing failure rates. NZ Building Code H1 (November 2022) raises roof R-values significantly. RANZ (Roofing Association of NZ) is the trust signal. WorkSafe NZ height-safety compliance is mandatory.
Hourly rate
$65-$145
per hour, weekday daytime
Call-out fee
$46-$98
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common roofer jobs in Invercargill
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in NZD.
Site inspection and quote
What's included
Most established roofers inspect free for jobs over $2,170. Detailed condition reports may be charged.
Single tile replacement
What's included
Includes tile, mortar, and 30-60 min labour. Access difficulty adds cost on steep roofs.
Ridge cap repair (per linear metre)
What's included
Includes mortar bedding, pointing, and labour. Full ridge replacement runs $65-180/m.
Gutter replacement (per linear metre)
What's included
Includes Colorbond or PVC gutter, brackets, and labour. Hi-flow profiles and concealed gutters cost more.
Roof leak repair (single point)
What's included
Includes locating, flashing or sealant repair, and 1-3 hours labour. Hidden leaks needing trace work cost more.
Partial re-tile (per square metre)
What's included
Includes new tiles, batten check, underlay if needed. Match-to-existing-colour can add lead time.
Full reroof, concrete tile (per sqm)
What's included
Includes strip, batten check, sarking, new tiles, ridge bedding, and labour. Steep pitches and complex valleys cost more.
Full reroof, Colorbond sheet (per sqm)
What's included
Includes strip, batten, sarking, new sheets, fixings, and labour. Custom profiles or colours cost more.
Daily access labour (2-person team)
What's included
Includes scaffold or harness setup. Full-day labour for repairs across multiple points.
Invercargill quote factors
What to factor into your Invercargill roofer quote
Local context that should shape what you quote as a roofer in Invercargill. Cool temperate maritime South Island. Cold winters (June-Aug, 1-9°C, regular overnight frost, occasional snow at sea level), mild summers (Dec-Feb, 14-19°C, rarely above 22°C — coolest NZ summer), high rainfall ~1,150mm/year. Persistent strong cold southerly wind.
Heritage slate and decorative tile on Edwardian stock
Heritage Edwardian Dee Street and Tay Street Conservation Area roofs, including Tisbury Speedway Centre architecture, often have natural Welsh slate or Marseille decorative tile. On Category 1 and 2 Heritage NZ listings the replacement slate must match the original in size, thickness and colour. Quote per-sqm: Welsh slate NZ$325 to NZ$595 per sqm installed; reclaimed Marseille tile NZ$305 to NZ$520 per sqm. Long-run Colorsteel and Decramastic replacement is refused on heritage listed roofs by Invercargill City Council.
Long-run Colorsteel and Decramastic on standard stock
Standard Invercargill timber villa and modern stock runs long-run Colorsteel (Colorsteel Endura, Maxx, Dridex) or Decramastic. Quote per-sqm installed: Colorsteel long-run NZ$145 to NZ$235 per sqm; Decramastic NZ$125 to NZ$190 per sqm; reroof labour and existing strip-out NZ$49 to NZ$105 per sqm. Invercargill's persistent strong cold southerly wind off the Southern Ocean drives 25 to 35 percent above-average flashing failure; quote heavier-gauge flashing and additional fixing density.
Heritage Edwardian parapet, verandah and ridge
Heritage Edwardian Dee Street and Tay Street Conservation Area stock has ornate parapets, verandah roofs and decorative ridge work. Quote heritage parapet repair (NZ$705 to NZ$1,950 per linear metre), verandah roof restoration (NZ$3,030 to NZ$9,210 per verandah) and decorative ridge cap as separate lines. Resource consent (NZ$1,630 to NZ$5,420) and Heritage NZ liaison apply on Category 1 and 2 stock.
NZ Building Code H1 (Nov 2022) roof R-value
H1 raises roof R-value to R-6.6 minimum on new builds and major reroofs in Invercargill's climate zone 3 (the coldest residential zone alongside Dunedin and Central Otago). Quote insulation upgrade (NZ$27 to NZ$60 per sqm of ceiling area for blown-in or batt insulation top-up) as a separate line on every reroof. Building consent and Code Compliance Certificate (CCC) close out the work.
RANZ accreditation and WorkSafe height-safety
RANZ (Roofing Association of NZ) membership is the trust signal for premium Invercargill roofing. WorkSafe NZ height-safety compliance is mandatory (working at height plan, edge protection, harness, safe scaffold). Quote scaffold (NZ$4,880 to NZ$13,000 for a typical residential reroof), edge protection and WorkSafe-compliant safety plan as separate lines. Public liability NZ$5m minimum for Conservation Area work where you risk damaging adjoining heritage stock.
Healthy Homes Standards roof insulation retrofit
Healthy Homes Standards 2019 set minimum ceiling insulation R-value (R-2.9 minimum on existing rentals built before 2008). SIT student-rental landlord portfolios drive landlord retrofit volume. Quote per-property ceiling insulation top-up (NZ$3,030 to NZ$5,960 for a 3 to 4 bed) including blown-in fibreglass or wool batt, sub-floor inspection and compliance statement for landlord. Build retained agreements with 3 to 5 student-rental landlords.
Sample quote
A real Invercargill roofer quote you can copy
Full reroof, concrete tile to Colorbond sheet, 145sqm single-storey. Replace the line items and rates with your own; the structure stays.
Strip existing concrete tiles, debris removal to landfill
Batten replacement (rotten or out-of-spec sections, 25% of total area)
Sarking underlay (145sqm, premium foil-faced thermal)
Colorbond Trimdek sheet (145sqm, customer-choice colour, 0.42 BMT)
New gutters, downpipes, valley flashings
Roofing labour (5 days, 3-person team, scaffold included)
Final clean, gutter test with water, warranty handover
FAQ
Invercargill roofer pricing questions, answered
Common questions about roofer pricing in Invercargill, with answers framed for tradies pricing their own work.
Per-sqm installed: Welsh slate NZ$325 to NZ$595 (heritage); Marseille tile NZ$305 to NZ$520; Colorsteel long-run NZ$145 to NZ$235; Decramastic NZ$125 to NZ$190. Hourly NZ$81 to NZ$140 standard, NZ$145 to NZ$255 heritage slate specialist. Invercargill rates run 20 to 30 percent below Auckland and comparable Dunedin. Add GST at 15 percent. Scaffold, flashing, ridge cap and Code Compliance Certificate are separate lines.
Not on Category 1 or 2 Heritage NZ listings and not in Dee Street or Tay Street Conservation Area precincts. The replacement must match the original slate or Marseille tile in size, thickness and colour. Quote natural Welsh slate (NZ$325 to NZ$595 per sqm) or reclaimed Marseille tile (NZ$305 to NZ$520 per sqm). Long-run Colorsteel and Decramastic are refused by Invercargill City Council heritage planners on heritage stock.
Heritage parapet repair NZ$705 to NZ$1,950 per linear metre. Verandah roof restoration NZ$3,030 to NZ$9,210 per verandah. Decorative ridge cap as separate lines. Resource consent (NZ$1,630 to NZ$5,420) and Heritage NZ liaison apply on Category 1 and 2 Conservation Area stock. Specialist subcontractor allowance on ornate Tisbury Speedway Centre architecture features.
H1 (November 2022) raises roof R-value to R-6.6 minimum on new builds and major reroofs in Invercargill's climate zone 3 (the coldest residential zone alongside Dunedin and Central Otago). Quote insulation upgrade (NZ$27 to NZ$60 per sqm of ceiling area for blown-in or batt insulation top-up) as a separate line on every reroof. Building consent and Code Compliance Certificate close out the work.
Southern and western elevations get 25 to 35 percent above-average flashing failure rates because of persistent strong cold southerly wind off the Southern Ocean. Quote heavier-gauge flashing (0.55mm versus standard 0.40mm), additional fixing density and storm-grade ridge cap. Heritage stock with original lead flashing needs replacement on the same cycle as the slate or Marseille tile.
Hourly rates are $65 to $140 in the US, £35-85 in the UK, A$76-150 in Australia, R280-750 in South Africa, and C$65-140 in Canada. Most roofers prefer fixed-price by square metre for installs and reserve hourly for repairs and inspections.
A typical 3-bed single-storey home takes 4-7 working days for a strip-and-replace, including new sarking and ridge bedding. Larger or steeper roofs run 7-14 days. Weather delays add 1-3 days in winter or wet season.
Yes, 2-3 quotes for any reroof over $5,420. Compare materials (tile brand, sheet thickness), sarking inclusion, gutter scope, and warranty length. The cheapest quote often skips sarking or uses budget-grade fixings.
A proper inspection walks the roof, photographs every section, checks battens, flashings, valleys, gutters, and the ceiling cavity for water staining. Reports run 4-8 pages with photo evidence. Drone-only inspections miss too much; insist on a roof-walk.
Most regions: like-for-like reroofs do not need permits, but switching material (tile to sheet) sometimes does. Heritage-listed properties always need approval. The roofer should know and include permits as a line item.
Keep going
More roofer resources
The full international pricing guide, ready-to-send templates, and the main roofers page.
Full roofer pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Roofers
Send branded quotes and invoices from your phone in 2 minutes. Built for roofers.
Roofer Quote Template
Itemised roofer quote with tile spec, scaffold, flashings, and rot provisional.
Testimonials
Trusted by tradespeople in Invercargill
Real roofers and other tradies in Invercargill use QuoteGenio to quote and invoice from their phone.
“My quotes look a lot more professional now. Clients take them seriously and I spend less time formatting documents.”
Megan Daniels
Interior Designer · Birmingham
“Quoting per square metre used to take me forever. I have templates set up now that cover lawn, pavers, and planting separately. Cuts my admin in half.”
Nathan Walsh
Landscaper · Melbourne
“I used to forget to follow up on quotes. Now I can see what has been viewed, approved, or still pending. Makes my workflow much easier.”
Brandon Daniels
Installer · Paris
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.