Glazier pricing in Sydney
What glaziers charge in Sydney (typically $70-$140/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Sydney glazier pricing
What glaziers should charge in Sydney
Sydney glaziers work in a market dominated by harbourside premium frameless balustrades and stacker doors, Federation and Edwardian sash window restoration in Paddington, Glebe, Balmain and Woollahra, apartment window replacement in Pyrmont, Barangaroo and Olympic Park, and commercial shopfront and curtain-wall work. AS 1288 (Glass in buildings) governs all glazing; AS 2208 governs safety glass. Coastal salt-air at Bondi, Manly, Cronulla and harbour-front sites requires marine-grade hardware. Heritage Conservation Areas restrict visible window changes. Custom imported glass (low-E, laminated, acoustic) ships 4-10 weeks. GST 10% applies.
Hourly rate
$70-$140
per hour, weekday daytime
Call-out fee
$49-$105
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common glazier jobs in Sydney
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in AUD.
Site measure and quote
What's included
Most glaziers measure free for jobs over $635. Bespoke or commercial sites may be charged.
Single pane repair (4mm float)
What's included
Includes glass cut to size, putty or beading, and 30-60 min labour. Larger panes or laminated cost more.
Toughened glass (per square metre)
What's included
Includes glass only. Required for shower screens, balustrades, and any panel below 1m off the floor.
Double-glazed unit replacement
What's included
Per window. Includes glass unit (sealed double pane), argon gas, low-E coating, and 1-2 hour labour. Frame must be sound.
Frameless shower screen (single panel)
What's included
Includes 10mm toughened glass, hinges, channel, sealant, and 2-3 hour labour. Custom curves and brass hardware add cost.
Glass splashback (per square metre)
What's included
Includes 6mm toughened back-painted glass, cut-outs around outlets, and 1-2 hour labour. White and custom colours premium-priced.
Balustrade glass (per linear metre)
What's included
Includes 12mm toughened or laminated glass, channel or spigot fixings, and labour. Stairs and curved runs cost more.
Full home double-glazing retrofit
What's included
Depends on window count, frame replacement vs glass-only, and access. Typical 3-bed home 8-12 windows.
Emergency board-up (broken window)
What's included
Includes site visit, debris clear, board-up to secure the property. Glass replacement quoted separately the next day.
Sydney quote factors
What to factor into your Sydney glazier quote
Local context that should shape what you quote as a glazier in Sydney. Temperate humid subtropical. Hot humid summers (Dec-Feb, 30°C+), mild winters (June-Aug, rarely below 5°C), heavy summer storms, La Niña wet years (2020-2022) drove flooding. Coastal salt-air corrosion on harbourside and beachside metalwork. Extreme UV (AS/NZS UV standards drive paint cycles every 5-7 years).
Harbourside frameless balustrades and stacker doors
Mosman, Vaucluse, Double Bay, Point Piper, Bellevue Hill and Woollahra harbour-view balconies command frameless 12-15mm toughened glass balustrades (A$825-A$1,780 per linear metre installed) and large-format stacker doors with low-iron starphire glass (A$3,180-A$7,000 per linear metre installed). State AS 1288 compliance, AS 2208 safety-glass certification, and 316 stainless marine-grade hardware on the quote.
Federation and Edwardian sash window restoration
Paddington, Glebe, Balmain, Annandale, Newtown, Woollahra and Surry Hills Federation and Edwardian sash window restoration is a premium niche. Quote re-cord, re-glaze, re-weatherstrip and slimline double-glazing retrofit at A$825-A$2,290 per sash. Heritage Conservation Area DCPs often mandate matching original profile, glazing-bar detail and putty finish; quote heritage planner consultation (A$635-A$1,910) on visible front-facade work.
AS 1288, AS 2208 and 316 marine-grade hardware
AS 1288 (Glass in buildings) governs all glazing; AS 2208 governs safety glass. Cite both standards on the quote for permitted work. Coastal salt-air at Bondi, Bronte, Manly, Cronulla, Vaucluse, Point Piper and Mosman requires 316 stainless marine-grade hardware (clamps, hinges, patch fittings). Standard 304 stainless fails in 5-10 years on the coast vs 25-40 years for 316.
Apartment window replacement and Strata Committee approval
Pyrmont, Barangaroo, Olympic Park, Parramatta and Zetland apartment window replacement needs Strata Committee approval (4-12 weeks). Quote per-window unit (A$1,910-A$5,730 installed including double-glazed low-E, frame, install) at building-wide portfolio rates. Buildings replace windows in 30-200 unit batches; lock in master contracts with strata managers.
Frameless shower screens and acoustic glass
Frameless 10mm or 12mm toughened shower screens are universally specified in Sydney premium bathroom renos (A$825-A$2,290 per screen installed). Acoustic glass (laminated, 6.38mm+) for CBD apartment and street-facing work commands premium (A$355-A$825/sqm installed). State glass thickness, AS 2208 toughening certification and clip brand on the quote.
Custom imported glass lead times
Custom imported glass (low-E coatings, laminated, acoustic, low-iron starphire): 4-10 weeks. Stock Australian float and toughened: 1-3 weeks. Quote lead time on the contract; Strata Committee approval (4-12 weeks) often runs in parallel. GST 10% on every tax invoice once you cross A$95,450 turnover.
Sample quote
A real Sydney glazier quote you can copy
Frameless shower screen, single panel, 1100mm wide, custom. Replace the line items and rates with your own; the structure stays.
10mm toughened safety glass (1100mm x 2000mm, polished edges)
Hinges (2 x heavy-duty wall-to-glass, brushed nickel)
Sealing strip (full-length water seal, magnetic close)
Structural sealant (Sika or equivalent, 24hr cure)
Installation labour (2 hours, single glazier)
Site measure (already completed)
Removal of old shower curtain rail and silicone
FAQ
Sydney glazier pricing questions, answered
Common questions about glazier pricing in Sydney, with answers framed for tradies pricing their own work.
A$100-A$205/hr for repair work. Per-unit install: A$1,910-A$5,730 for double-glazed low-E apartment windows; A$825-A$2,290 for Federation/Edwardian sash restoration; A$825-A$1,780 per LM for frameless balustrade; A$3,180-A$7,000 per LM for harbourside stacker doors; A$825-A$2,290 for frameless shower screens. Harbourside premium of 20-35% above standard Greater Sydney.
A$825-A$1,780 per linear metre installed for frameless 12-15mm toughened glass balustrades. State AS 1288 compliance, AS 2208 safety-glass certification, 316 stainless marine-grade hardware (clamps, hinges, patch fittings), and the warranty (typically 10-15 years on glass, 25 years on 316 stainless). Mosman, Vaucluse, Double Bay, Point Piper clients pay readily for the marine-grade spec.
Yes, niche premium revenue. Paddington, Glebe, Balmain, Annandale, Newtown, Woollahra and Surry Hills heritage sash restoration runs A$825-A$2,290 per sash including re-cord, re-glaze, re-weatherstrip and slimline double-glazing retrofit. Heritage Conservation Area DCPs often mandate matching original profile; quote heritage planner consultation (A$635-A$1,910) on visible front-facade work.
AS 1288 (Glass in buildings) on all glazing work; AS 2208 (Safety glass) on toughened and laminated glass. Cite both on the quote for permitted work. State 316 stainless marine-grade hardware on every coastal job (Bondi, Bronte, Manly, Cronulla, Vaucluse, Point Piper, Mosman); standard 304 stainless fails in 5-10 years on the coast.
A$1,910-A$5,730 per unit installed for double-glazed low-E. Building-wide portfolio rates with 30-200 unit batches; lock in master contracts with strata managers. Add Strata Committee approval lead time (4-12 weeks), by-law modification consent (A$635-A$3,180), and engineer's letter where structural change is involved.
Hourly rates are $70 to $140 in the US, £30-75 in the UK, A$89-140 in Australia, R220-600 in South Africa, and C$70-115 in Canada. Most glaziers quote per pane or per square metre rather than hourly because glass cost dominates the bill.
Standard 4mm float glass in a sound frame is $230-420 per pane installed. Larger panes, double-glazed units, or laminated safety glass run $510-1,500. The variables: glass type, pane size, frame condition, and access.
For jobs over $635, get 2-3 quotes. Compare glass spec (thickness, grade, coating), frame work scope, and warranty. The cheapest quote often substitutes lower-grade glass or skips the frame inspection.
Double-glazed units have two panes of glass with argon gas and a desiccant seal between them, plus a low-E coating. Manufacturing cost is 3-5x single pane. The payback: 20-40% energy savings on heating and cooling over 10-15 years.
Code requires safety glass (toughened or laminated) in doors, sidelights within 300mm of a door, wet areas (shower, bathroom), and any panel below 1m from floor. Outside those locations, regular float glass is legal but less safe.
Keep going
More glazier resources
The full international pricing guide, ready-to-send templates, and the main glaziers page.
Full glazier pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Glaziers
Send branded quotes and invoices from your phone in 2 minutes. Built for glaziers.
Glazier Quote Template
Glazier quote with pane spec, dimensions, framing, and emergency surcharge.
Testimonials
Trusted by tradespeople in Sydney
Real glaziers and other tradies in Sydney use QuoteGenio to quote and invoice from their phone.
“My clients respond faster to professional PDF quotes. Being able to send via WhatsApp means they do not need to check email. I am closing more jobs.”
Sarah Wilson
Designer · London
“Clients love how professional the quotes look. Feels like I upgraded my whole business overnight. The mobile app is a lifesaver.”
Jessica Martinez
HVAC Contractor · Austin, TX
“Roofs are not cheap. Having itemised quotes with labour and materials split helps clients trust my pricing. My acceptance rate has gone up noticeably.”
Marco Davids
Roofer · Cape Town
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.