Glazier pricing in Christchurch
What glaziers charge in Christchurch (typically $65-$135/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Christchurch glazier pricing
What glaziers should charge in Christchurch
Christchurch glaziers work in a market shaped by H1 Energy 2022 double-glazing mandate, post-quake CBD curtain-wall commercial rebuild, premium-suburb floor-to-ceiling glass and view-frame installations (Cashmere, Sumner, Mount Pleasant overlook the Pacific or Port Hills), and heritage villa sash and casement restoration. NZS 4223 governs glazing in NZ buildings. Earthquake-rated tempered or laminated glass spec standard for TC2/TC3 sites. Drier climate means less weathertightness pressure on glazing detail than Auckland/Wellington.
Hourly rate
$65-$135
per hour, weekday daytime
Call-out fee
$46-$98
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common glazier jobs in Christchurch
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in NZD.
Site measure and quote
What's included
Most glaziers measure free for jobs over $590. Bespoke or commercial sites may be charged.
Single pane repair (4mm float)
What's included
Includes glass cut to size, putty or beading, and 30-60 min labour. Larger panes or laminated cost more.
Toughened glass (per square metre)
What's included
Includes glass only. Required for shower screens, balustrades, and any panel below 1m off the floor.
Double-glazed unit replacement
What's included
Per window. Includes glass unit (sealed double pane), argon gas, low-E coating, and 1-2 hour labour. Frame must be sound.
Frameless shower screen (single panel)
What's included
Includes 10mm toughened glass, hinges, channel, sealant, and 2-3 hour labour. Custom curves and brass hardware add cost.
Glass splashback (per square metre)
What's included
Includes 6mm toughened back-painted glass, cut-outs around outlets, and 1-2 hour labour. White and custom colours premium-priced.
Balustrade glass (per linear metre)
What's included
Includes 12mm toughened or laminated glass, channel or spigot fixings, and labour. Stairs and curved runs cost more.
Full home double-glazing retrofit
What's included
Depends on window count, frame replacement vs glass-only, and access. Typical 3-bed home 8-12 windows.
Emergency board-up (broken window)
What's included
Includes site visit, debris clear, board-up to secure the property. Glass replacement quoted separately the next day.
Christchurch quote factors
What to factor into your Christchurch glazier quote
Local context that should shape what you quote as a glazier in Christchurch. Temperate continental for NZ (drier than North Island). Warm dry summers (Dec-Feb, 22-26°C, occasional 30°C+ nor'wester heatwave), cool winters (June-Aug, 5-10°C days, occasional -2°C to -5°C overnight frost, occasional snow), low rainfall (~620mm/year, one of NZ's driest cities). Earthquake risk extreme (Alpine Fault to west). Liquefaction risk on Avon + Heathcote River alluvial soils (TC3 land).
H1 Energy 2022 double-glazing mandate
H1 Energy code stricter since November 2022 mandates double-glazing (U-factor 1.7 or lower) on most new builds and major renovations in Christchurch climate zone. Quote thermally-broken aluminium with double-glazed low-E argon-filled IGUs (NZ$770-NZ$1,420/sqm installed) as standard. Triple glazing (NZ$1,300-NZ$2,130/sqm) for Passive House and Homestar 6+ premium builds. State U-factor and SHGC on every quote.
Premium suburb glass-wall tier
Cashmere (8022), Sumner (8081), Mount Pleasant (8081), Scarborough (8081) and Fendalton (8014) clients install floor-to-ceiling glass walls and sliding stack doors to capture Port Hills, Pacific or Botanic Gardens views. Quote system brand (APL Architectural Series, Vantage, Fairview, Altherm) explicitly. Premium frameless stacker NZ$2,950-NZ$6,500/sqm; ultra-premium thermally-broken with triple glazing NZ$4,140-NZ$8,860/sqm.
Seismic-rated tempered or laminated glass
TC2/TC3 land sites and any large openings in Christchurch require earthquake-rated tempered or laminated glass per NZS 4223. Quote tempered glass and laminated glass (interlayer protects against shattering in seismic event) at premium NZ$140-NZ$330/sqm over standard. State NZS 4223 compliance on every quote.
Post-quake CBD curtain-wall rebuild
Christchurch CBD reconstruction since 2011 drove substantial commercial curtain-wall and storefront work. Quote commercial curtain-wall (NZ$1,000-NZ$2,130/sqm installed for standard storefront; NZ$1,770-NZ$4,140/sqm for premium thermally-broken Schueco, Kawneer, Reynaers) including engineering and seismic detail. Lock in subcontract relationships with rebuild GCs.
Heritage villa sash and casement restoration
Surviving 1880s-1910s timber villas in Riccarton (8011), St Albans (8014), Sydenham (8023) often have original timber double-hung sash or casement windows. Quote heritage restoration (NZ$1,420-NZ$3,780 per window) including timber repair, glazing replacement (often single-pane heritage glass), period-correct hardware, draught seal upgrade. Niche specialty; build portfolio.
Frameless shower enclosures
Frameless 10mm or 12mm tempered shower screens universally specified in premium-suburb bathroom renos. Quote per-sqm of glass (NZ$770-NZ$1,300/sqm) plus hardware (NZ$495-NZ$1,480 per door, NZ$215-NZ$530 per panel). State glass thickness, tempering certification (AS/NZS 2208), and clip brand on the quote.
Sample quote
A real Christchurch glazier quote you can copy
Frameless shower screen, single panel, 1100mm wide, custom. Replace the line items and rates with your own; the structure stays.
10mm toughened safety glass (1100mm x 2000mm, polished edges)
Hinges (2 x heavy-duty wall-to-glass, brushed nickel)
Sealing strip (full-length water seal, magnetic close)
Structural sealant (Sika or equivalent, 24hr cure)
Installation labour (2 hours, single glazier)
Site measure (already completed)
Removal of old shower curtain rail and silicone
FAQ
Christchurch glazier pricing questions, answered
Common questions about glazier pricing in Christchurch, with answers framed for tradies pricing their own work.
NZ$100-NZ$205/hour for standard Christchurch. Premium suburbs (Fendalton, Merivale, Cashmere, Sumner, Mount Pleasant) NZ$160-NZ$285/hour. Per-window-unit install: double-glazed low-E IGU NZ$770-NZ$1,420/sqm; triple glazing NZ$1,300-NZ$2,130/sqm; tempered or laminated NZ$140-NZ$330/sqm premium; frameless shower NZ$770-NZ$1,300/sqm of glass; glass-wall systems NZ$2,950-NZ$8,860/sqm. State GST 15% on every quote.
H1 mandates double-glazing (U-factor 1.7 or lower) on most new builds and major renovations in Christchurch climate zone. Quote thermally-broken aluminium with double-glazed low-E argon-filled IGUs (NZ$770-NZ$1,420/sqm installed) as standard. Triple glazing (NZ$1,300-NZ$2,130/sqm) for Passive House and Homestar 6+ premium builds. State U-factor and SHGC on every quote.
NZ$2,950-NZ$8,860/sqm depending on system, panel size and glazing spec. Cashmere, Sumner, Mount Pleasant, Scarborough and Fendalton clients install floor-to-ceiling glass to capture Port Hills, Pacific or Botanic Gardens views. Quote system brand (APL Architectural Series, Vantage, Fairview, Altherm) explicitly. Add seismic-rated tempered or laminated glass for TC2/TC3 sites.
Yes, on every TC2 and TC3 land job and any large openings in Christchurch. NZS 4223 governs glazing in NZ buildings. Quote tempered glass and laminated glass (interlayer protects against shattering in seismic event) at premium NZ$140-NZ$330/sqm over standard. State NZS 4223 compliance on every quote.
Yes, Christchurch CBD reconstruction since 2011 drove substantial commercial curtain-wall and storefront work. Quote commercial curtain-wall (NZ$1,000-NZ$2,130/sqm installed for standard storefront; NZ$1,770-NZ$4,140/sqm for premium thermally-broken Schueco, Kawneer, Reynaers). Lock in subcontract relationships with rebuild GCs.
Hourly rates are $65 to $130 in the US, £30-75 in the UK, A$83-140 in Australia, R220-600 in South Africa, and C$65-115 in Canada. Most glaziers quote per pane or per square metre rather than hourly because glass cost dominates the bill.
Standard 4mm float glass in a sound frame is $215-420 per pane installed. Larger panes, double-glazed units, or laminated safety glass run $475-1,500. The variables: glass type, pane size, frame condition, and access.
For jobs over $590, get 2-3 quotes. Compare glass spec (thickness, grade, coating), frame work scope, and warranty. The cheapest quote often substitutes lower-grade glass or skips the frame inspection.
Double-glazed units have two panes of glass with argon gas and a desiccant seal between them, plus a low-E coating. Manufacturing cost is 3-5x single pane. The payback: 20-40% energy savings on heating and cooling over 10-15 years.
Code requires safety glass (toughened or laminated) in doors, sidelights within 300mm of a door, wet areas (shower, bathroom), and any panel below 1m from floor. Outside those locations, regular float glass is legal but less safe.
Keep going
More glazier resources
The full international pricing guide, ready-to-send templates, and the main glaziers page.
Full glazier pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Glaziers
Send branded quotes and invoices from your phone in 2 minutes. Built for glaziers.
Glazier Quote Template
Glazier quote with pane spec, dimensions, framing, and emergency surcharge.
Testimonials
Trusted by tradespeople in Christchurch
Real glaziers and other tradies in Christchurch use QuoteGenio to quote and invoice from their phone.
“My clients respond faster to professional PDF quotes. Being able to send via WhatsApp means they do not need to check email. I am closing more jobs.”
Sarah Wilson
Designer · London
“Clients love how professional the quotes look. Feels like I upgraded my whole business overnight. The mobile app is a lifesaver.”
Jessica Martinez
HVAC Contractor · Austin, TX
“Roofs are not cheap. Having itemised quotes with labour and materials split helps clients trust my pricing. My acceptance rate has gone up noticeably.”
Marco Davids
Roofer · Cape Town
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.