Glazier pricing in Invercargill
What glaziers charge in Invercargill (typically $65-$135/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Invercargill glazier pricing
What glaziers should charge in Invercargill
Invercargill glaziers work in a market shaped by Heritage Edwardian rimu and kauri sash window restoration (an Invercargill specialism on Dee Street and Tay Street Conservation Area stock), NZ Building Code H1 (November 2022) double-glazing requirements (climate zone 3, the coldest residential zone), frameless shower screens in premium bathroom renos, and a small commercial storefront market in Dee Street CBD. Replacement of original glazing on Category 1 and 2 Heritage NZ listings is restricted; restoration is the default. Imported tempered and laminated glass ships 5 to 9 weeks to Invercargill.
Hourly rate
$65-$135
per hour, weekday daytime
Call-out fee
$46-$98
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common glazier jobs in Invercargill
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in NZD.
Site measure and quote
What's included
Most glaziers measure free for jobs over $590. Bespoke or commercial sites may be charged.
Single pane repair (4mm float)
What's included
Includes glass cut to size, putty or beading, and 30-60 min labour. Larger panes or laminated cost more.
Toughened glass (per square metre)
What's included
Includes glass only. Required for shower screens, balustrades, and any panel below 1m off the floor.
Double-glazed unit replacement
What's included
Per window. Includes glass unit (sealed double pane), argon gas, low-E coating, and 1-2 hour labour. Frame must be sound.
Frameless shower screen (single panel)
What's included
Includes 10mm toughened glass, hinges, channel, sealant, and 2-3 hour labour. Custom curves and brass hardware add cost.
Glass splashback (per square metre)
What's included
Includes 6mm toughened back-painted glass, cut-outs around outlets, and 1-2 hour labour. White and custom colours premium-priced.
Balustrade glass (per linear metre)
What's included
Includes 12mm toughened or laminated glass, channel or spigot fixings, and labour. Stairs and curved runs cost more.
Full home double-glazing retrofit
What's included
Depends on window count, frame replacement vs glass-only, and access. Typical 3-bed home 8-12 windows.
Emergency board-up (broken window)
What's included
Includes site visit, debris clear, board-up to secure the property. Glass replacement quoted separately the next day.
Invercargill quote factors
What to factor into your Invercargill glazier quote
Local context that should shape what you quote as a glazier in Invercargill. Cool temperate maritime South Island. Cold winters (June-Aug, 1-9°C, regular overnight frost, occasional snow at sea level), mild summers (Dec-Feb, 14-19°C, rarely above 22°C — coolest NZ summer), high rainfall ~1,150mm/year. Persistent strong cold southerly wind.
Restoration glass on Heritage Edwardian sash windows
Category 1 and 2 Heritage NZ listed Heritage Edwardian Dee Street and Tay Street Conservation Area timber villa and shopfront sash windows often have original cylinder or crown glass. Replacement must match the optical character. Quote restoration glass (slumped, cylinder or crown from Tatra, Lambert's or Bendheim via NZ importer) at NZ$355 to NZ$770 per sqm for the glass alone, plus NZ$320 to NZ$660 per sash labour. Niche specialist work and a clear premium.
NZ Building Code H1 (Nov 2022) double-glazing climate zone 3
H1 (effective November 2022, fully phased by November 2023) raises glazing U-value requirements significantly. Invercargill sits in climate zone 3 alongside Dunedin and Central Otago, the coldest residential zone. Single-glazed replacement is no longer compliant on new builds and major renovations. Quote double-glazed sealed unit (NZ$355 to NZ$660 per sqm installed in standard timber frame) and triple-glazed option (NZ$590 to NZ$970 per sqm) for premium Avenal, Glengarry, Waikiwi and Strathern work. State 'H1 compliant' on every quote.
Heritage Edwardian restoration over modern double glazing
Listed and Heritage NZ scheduled buildings cannot be replaced with modern double-glazed sealed units that change the visible glazing-bar profile. Restoration of the original sash with slim-line secondary glazing (Storm Windows, Granada, Selectaglaze via NZ importer) is the consented thermal upgrade route. Quote secondary glazing at NZ$735 to NZ$1,600 per window installed including survey, slim-line frame and laminated glass.
Frameless shower screens in premium bathroom renos
Frameless 10mm or 12mm tempered shower screens are universally specified in Avenal, Glengarry, Waikiwi and Strathern premium bathroom renovations. Quote per-sqm of glass (NZ$475 to NZ$850 installed) plus hardware (NZ$320 to NZ$735 per door, NZ$135 to NZ$320 per panel). State glass thickness, tempering certification (AS/NZS 2208) and brand on the quote.
Cold-winter condensation and double glazing demand
Invercargill's cold-for-NZ winters and persistent strong cold southerly wind drive interior condensation on single-glazed Heritage Edwardian stock. Double-glazing retrofit demand is strong on owner-occupied villa stock; quote retrofit double-glazing in original timber sash (NZ$660 to NZ$1,360 per window installed including custom timber rebate, sealed unit, draught-stop). Niche specialist work; build a portfolio of past heritage retrofits.
Commercial storefront in Dee Street CBD
Dee Street CBD and the Heritage Edwardian Conservation Area shopfront work needs resource consent on heritage scheduled buildings. Quote shopfront glazing at NZ$735 to NZ$1,360 per sqm including toughened or laminated glass, frame, install and council-approved signage. Lock in retained relationships with 3 to 5 retail-property managers for recurring revenue.
Sample quote
A real Invercargill glazier quote you can copy
Frameless shower screen, single panel, 1100mm wide, custom. Replace the line items and rates with your own; the structure stays.
10mm toughened safety glass (1100mm x 2000mm, polished edges)
Hinges (2 x heavy-duty wall-to-glass, brushed nickel)
Sealing strip (full-length water seal, magnetic close)
Structural sealant (Sika or equivalent, 24hr cure)
Installation labour (2 hours, single glazier)
Site measure (already completed)
Removal of old shower curtain rail and silicone
FAQ
Invercargill glazier pricing questions, answered
Common questions about glazier pricing in Invercargill, with answers framed for tradies pricing their own work.
Standard glazing repair NZ$85 to NZ$150 per hour. Restoration glass on Heritage Edwardian sash NZ$355 to NZ$770 per sqm for the glass alone, plus NZ$320 to NZ$660 per sash labour. Frameless shower screen NZ$475 to NZ$850 per sqm of glass plus NZ$320 to NZ$735 per door hardware. Secondary glazing NZ$735 to NZ$1,600 per window installed. Invercargill rates run 20 to 30 percent below Auckland and comparable Dunedin. Add GST at 15 percent.
Not on Category 1 or 2 Heritage NZ listed buildings. Invercargill City Council heritage planners refuse uPVC replacement. Restoration of the original sash is the route, with restoration glass (NZ$355 to NZ$770 per sqm) and sash repair labour (NZ$320 to NZ$660 per sash). Secondary glazing inside the original sash is the consented thermal upgrade route.
Yes on new builds and major renovations. H1 (November 2022) raises glazing U-value requirements significantly; Invercargill sits in climate zone 3 alongside Dunedin and Central Otago, the coldest residential zone. Single-glazed replacement is no longer compliant. Quote double-glazed sealed unit (NZ$355 to NZ$660 per sqm installed in standard timber frame) and triple-glazed option (NZ$590 to NZ$970 per sqm) for premium pockets. State 'H1 compliant' on every quote.
NZ$735 to NZ$1,600 per window installed including survey, slim-line frame and laminated glass. Storm Windows, Granada and Selectaglaze (via NZ importer) are the standard suppliers. Add resource consent (NZ$1,420 to NZ$4,140) where internal alteration is visible from outside through the original sash. Secondary glazing is the consented thermal upgrade route on Heritage Edwardian sash.
NZ$660 to NZ$1,360 per window installed including custom timber rebate, sealed unit and draught-stop. Niche specialist work; build a portfolio of past heritage retrofits. Cold-winter condensation and persistent southerly wind drive demand on owner-occupied Heritage Edwardian villa stock. Resource consent applies on Category 1 or 2 Heritage NZ listings where the visible glazing-bar profile changes.
Hourly rates are $65 to $130 in the US, £30-75 in the UK, A$83-140 in Australia, R220-600 in South Africa, and C$65-115 in Canada. Most glaziers quote per pane or per square metre rather than hourly because glass cost dominates the bill.
Standard 4mm float glass in a sound frame is $215-420 per pane installed. Larger panes, double-glazed units, or laminated safety glass run $475-1,500. The variables: glass type, pane size, frame condition, and access.
For jobs over $590, get 2-3 quotes. Compare glass spec (thickness, grade, coating), frame work scope, and warranty. The cheapest quote often substitutes lower-grade glass or skips the frame inspection.
Double-glazed units have two panes of glass with argon gas and a desiccant seal between them, plus a low-E coating. Manufacturing cost is 3-5x single pane. The payback: 20-40% energy savings on heating and cooling over 10-15 years.
Code requires safety glass (toughened or laminated) in doors, sidelights within 300mm of a door, wet areas (shower, bathroom), and any panel below 1m from floor. Outside those locations, regular float glass is legal but less safe.
Keep going
More glazier resources
The full international pricing guide, ready-to-send templates, and the main glaziers page.
Full glazier pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Glaziers
Send branded quotes and invoices from your phone in 2 minutes. Built for glaziers.
Glazier Quote Template
Glazier quote with pane spec, dimensions, framing, and emergency surcharge.
Testimonials
Trusted by tradespeople in Invercargill
Real glaziers and other tradies in Invercargill use QuoteGenio to quote and invoice from their phone.
“The biggest win for me is speed. I can quote while I am still with the client and not worry about doing it later.”
Jason Naicker
Electrician · New Delhi
“Solar is a long sales cycle. The quote activity tracking lets me see who has re-opened a quote so I know when to follow up. Very useful.”
Hannah Clarke
Solar Installer · Manchester
“I used to delay sending quotes because it took too long. Now I do it straight after the job and get faster responses.”
Warren Jacobs
Plumber · Geneva
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.