Glazier pricing in Belfast
What glaziers charge in Belfast (typically £30-£75/hr), the local factors that move the rate, and a sample quote you can use as a starting point.
No credit card required
Belfast glazier pricing
What glaziers should charge in Belfast
Belfast glaziers work in a market dominated by Victorian terrace sash window restoration and double-glazing retrofit (BT7 Botanic, BT9 Lisburn Road, BT12 Lower Falls), 1930s-1950s window replacement in Belmont BT4 and Cherryvalley BT5, listed-building heritage glazing under Historic Environment Division NI, commercial shopfront and curtain-walling in Cathedral Quarter (BT1) and Titanic Quarter (BT3), and frameless shower enclosures. FENSA and CERTASS are the two main UK competent-person schemes; both operate in NI. GGF (Glass and Glazing Federation) is the recognised UK trade body.
Hourly rate
£30-£75
per hour, weekday daytime
Call-out fee
£21-£45
within standard radius
After-hours
1.5-2x
evening, weekend, holiday
Job pricing
What to charge for common glazier jobs in Belfast
Real-world price ranges for the jobs local tradies quote every week. Use the table as a starting point for your own quotes and adjust for parts, access, and your overheads. All figures in GBP.
Site measure and quote
What's included
Most glaziers measure free for jobs over £275. Bespoke or commercial sites may be charged.
Single pane repair (4mm float)
What's included
Includes glass cut to size, putty or beading, and 30-60 min labour. Larger panes or laminated cost more.
Toughened glass (per square metre)
What's included
Includes glass only. Required for shower screens, balustrades, and any panel below 1m off the floor.
Double-glazed unit replacement
What's included
Per window. Includes glass unit (sealed double pane), argon gas, low-E coating, and 1-2 hour labour. Frame must be sound.
Frameless shower screen (single panel)
What's included
Includes 10mm toughened glass, hinges, channel, sealant, and 2-3 hour labour. Custom curves and brass hardware add cost.
Glass splashback (per square metre)
What's included
Includes 6mm toughened back-painted glass, cut-outs around outlets, and 1-2 hour labour. White and custom colours premium-priced.
Balustrade glass (per linear metre)
What's included
Includes 12mm toughened or laminated glass, channel or spigot fixings, and labour. Stairs and curved runs cost more.
Full home double-glazing retrofit
What's included
Depends on window count, frame replacement vs glass-only, and access. Typical 3-bed home 8-12 windows.
Emergency board-up (broken window)
What's included
Includes site visit, debris clear, board-up to secure the property. Glass replacement quoted separately the next day.
Belfast quote factors
What to factor into your Belfast glazier quote
Local context that should shape what you quote as a glazier in Belfast. Atlantic mild oceanic. Mild winters (Dec-Feb, 3-8°C, occasional frost), cool summers (June-Aug, 14-19°C), high rainfall ~950mm/year. Persistent strong wind, storm season Sept-Apr.
FENSA / CERTASS registration
FENSA and CERTASS are the main UK competent-person schemes for window installation; both operate in Northern Ireland. Registration allows self-certification of NI Building Regulations Technical Booklet F1 (energy) compliance (no LABC NI sign-off for like-for-like replacement). Print scheme number on every quote and invoice. Annual fees £350-£900; recovered in 3-5 jobs. State 'Technical Booklet F1 self-certified' on every quote.
Victorian sash restoration vs replacement
Belfast Victorian and Edwardian terraces (BT7 Botanic, BT9 Lisburn Road, BT12 Lower Falls, BT15 New Lodge) have original timber sash windows. Quote restoration (£450-£1,400 per sash including re-cord, re-glaze, re-weatherstrip, draught-proof, splice rotten cill) as alternative to replacement (£800-£2,200 per replacement window). Restoration preserves historic character and is mandatory on Listed Buildings (Grades A, B+, B1, B2) under Historic Environment Division NI. Areas of Townscape Character (ATCs) drive Conservation Area consent on visible elevations.
Malone + Cultra + Holywood replacement window tier
Malone (BT9), Stranmillis (BT9), Cherryvalley (BT5), Cultra (BT18), Stormont/Belmont (BT4), Holywood (BT18) customers prefer Accoya timber sash heritage replacement, premium uPVC (Residence Collection 9, Rehau, Liniar), or aluminium (Origin, Schueco). Quote heritage Accoya sash £1,400-£3,200 per window installed; premium uPVC £450-£950; aluminium £900-£1,800. State U-value and energy rating.
NI Technical Booklet F1 energy compliance
NI Building Regulations Technical Booklet F1 (conservation of fuel and power) sets U-value requirements: typically 1.4 W/m²K for replacement windows. Quote double-glazed low-e argon-filled (1.2-1.4 W/m²K) or triple-glazed (0.8-1.0 W/m²K) on every replacement. FENSA/CERTASS registration covers self-certification; non-registered installers need LABC NI sign-off (£200-£500).
Listed Building + ATC consent
Historic Environment Division (Department for Communities NI) regulates Listed Buildings (Grades A, B+, B1, B2). Cathedral Quarter BT1, Queen's Conservation Area BT9, Malone BT9, Cultra BT18 have extensive listed stock. Areas of Townscape Character (ATCs) drive Conservation Area consent. Quote Listed Building Consent (12-20 week lead time) and ATC consent (8-12 weeks) as separate lines. Approved-glazing list (timber sash with slim-profile double glazing, heritage cylinder glass, leaded glazing) constrains scope.
Atlantic + Irish Sea wind glazing spec
Belfast Atlantic + Irish Sea exposure drives persistent strong wind; storm-rated glazing (BS EN 12211 wind resistance) increasingly specified on Cultra BT18 and Holywood BT18 coastal sites. Quote wind-class 4+ rating on exposed-aspect replacements; storm-rated frame fixings (stainless steel, structural sealant). Frameless 10mm or 12mm toughened shower screens universally specified in Malone BT9 and Cultra BT18 premium bathroom renos.
Sample quote
A real Belfast glazier quote you can copy
Frameless shower screen, single panel, 1100mm wide, custom. Replace the line items and rates with your own; the structure stays.
10mm toughened safety glass (1100mm x 2000mm, polished edges)
Hinges (2 x heavy-duty wall-to-glass, brushed nickel)
Sealing strip (full-length water seal, magnetic close)
Structural sealant (Sika or equivalent, 24hr cure)
Installation labour (2 hours, single glazier)
Site measure (already completed)
Removal of old shower curtain rail and silicone
FAQ
Belfast glazier pricing questions, answered
Common questions about glazier pricing in Belfast, with answers framed for tradies pricing their own work.
£40-£90/hour for repair work. Per-window install: replacement uPVC double-glazed £450-£950; premium uPVC (Residence Collection 9, Rehau) £750-£1,400; Accoya timber heritage sash £1,400-£3,200; aluminium £900-£1,800; sash restoration £450-£1,400 per sash. Malone BT9, Stranmillis BT9, Cultra BT18, Holywood BT18 premium of 20-35% above standard Belfast. VAT 20% as separate line.
Strongly recommended. FENSA and CERTASS are the main UK competent-person schemes for window installation; both operate in Northern Ireland. Registration allows self-certification of NI Building Regulations Technical Booklet F1 (energy) compliance (no LABC NI sign-off for like-for-like replacement). Print scheme number on every quote. Annual fees £350-£900; recovered in 3-5 jobs.
Yes, niche premium revenue. Belfast Victorian and Edwardian terraces (BT7 Botanic, BT9 Lisburn Road, BT12 Lower Falls, BT15 New Lodge) have original timber sash windows. Quote restoration (£450-£1,400 per sash including re-cord, re-glaze, re-weatherstrip, draught-proof, splice rotten cill) as alternative to replacement. Restoration preserves historic character and is mandatory on Listed Buildings (Grades A, B+, B1, B2) under Historic Environment Division NI.
£1,400-£3,200 per window installed for Accoya timber heritage sash with slim-profile double-glazing (12mm or 14mm), matched cill profile, and traditional glazing bars. Lead time 8-14 weeks for bespoke Accoya. ATC consent (8-12 weeks) often required; quote consent fee separately. State U-value and Technical Booklet F1 compliance.
Yes, on every replacement. NI Building Regulations Technical Booklet F1 (conservation of fuel and power) sets U-value requirements: typically 1.4 W/m²K for replacement windows. Quote double-glazed low-e argon-filled (1.2-1.4 W/m²K) as standard, triple-glazed (0.8-1.0 W/m²K) at premium £150-£280/sqm. FENSA/CERTASS self-certification covers Technical Booklet F1.
Hourly rates are £30 to £60 in the US, £30-75 in the UK, A£38-140 in Australia, R220-600 in South Africa, and C£30-115 in Canada. Most glaziers quote per pane or per square metre rather than hourly because glass cost dominates the bill.
Standard 4mm float glass in a sound frame is £98-420 per pane installed. Larger panes, double-glazed units, or laminated safety glass run £220-1,500. The variables: glass type, pane size, frame condition, and access.
For jobs over £275, get 2-3 quotes. Compare glass spec (thickness, grade, coating), frame work scope, and warranty. The cheapest quote often substitutes lower-grade glass or skips the frame inspection.
Double-glazed units have two panes of glass with argon gas and a desiccant seal between them, plus a low-E coating. Manufacturing cost is 3-5x single pane. The payback: 20-40% energy savings on heating and cooling over 10-15 years.
Code requires safety glass (toughened or laminated) in doors, sidelights within 300mm of a door, wet areas (shower, bathroom), and any panel below 1m from floor. Outside those locations, regular float glass is legal but less safe.
Keep going
More glazier resources
The full international pricing guide, ready-to-send templates, and the main glaziers page.
Full glazier pricing guide
International rates across 8 countries, plus all common jobs and a 10-question FAQ.
QuoteGenio for Glaziers
Send branded quotes and invoices from your phone in 2 minutes. Built for glaziers.
Glazier Quote Template
Glazier quote with pane spec, dimensions, framing, and emergency surcharge.
Testimonials
Trusted by tradespeople in Belfast
Real glaziers and other tradies in Belfast use QuoteGenio to quote and invoice from their phone.
“My quotes look a lot more professional now. Clients take them seriously and I spend less time formatting documents.”
Megan Daniels
Interior Designer · Birmingham
“Quoting per square metre used to take me forever. I have templates set up now that cover lawn, pavers, and planting separately. Cuts my admin in half.”
Nathan Walsh
Landscaper · Melbourne
“I used to forget to follow up on quotes. Now I can see what has been viewed, approved, or still pending. Makes my workflow much easier.”
Brandon Daniels
Installer · Paris
Read more
Guides on pricing and quoting
Long-form posts from the QuoteGenio blog that go deeper on quote writing, pricing strategy, and getting paid.
What a Free Quoting Tool for Tradespeople Should Do
Not every free quoting tool for tradespeople earns its keep. A plain checklist of what to look for, what to avoid, and what tradies actually use.
Convert a Quote to an Invoice in One Tap, No Retyping
The one-tap convert flow eliminates the retyping, the duplicate invoice numbers, and the mismatched line items that cost tradies hours each week.
Voice to Quote: Dictate a Job, Get Priced Line Items
Hold the mic, describe the job in your own words, release. The AI drafts a priced quote. What Voice to Quote is, when to use it, and when not to.
Free forever plan
Start quoting faster. Win more jobs.
Create professional quotes in minutes, send instantly, and stay on top of your work without the admin slowing you down.
Free to start. No credit card required.